Delfield SLT4-L Specifications

Download Specifications of Delfield SLT4-L Food Warmer for Free or View it Online on All-Guides.com.

Brand: Delfield

Category: Food Warmer

Type: Specifications

Model: Delfield SLT4-L , Delfield SLT4-R

Pages: 2 (0.13 Mb)

Download Delfield SLT4-L Specifications

Delfield SLT4-L Specifications - Page 1
1
Delfield SLT4-L Specifications - Page 2
2
PROJECT
ITEM #
QUANTITY DATE
APPROVAL
The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.
Short Form Specifications
Exterior Body is constructed of 20-gauge stainless steel. Stress points are
internally reinforced.
Exterior Top is constructed of 16-gauge stainless steel welded, ground and
polished into one integral unit. Top has square exterior corners.
Top has (4) electrically heated, recessed, die stamped stainless steel hot food
warmers. Food warmers are fully insulated on all sides and bottom with (1”
(2.54cm) of fiberglass matting and each is covered with a galvanized steel
jacket. Each food warmer has (1) heating element, rated at 1000 watts for
208 volt electrical service and wired to an individually adjustable temperature
control indicator light in the control panel. Food warmers are wired together to
an ON/OFF switch in the control panel. Each food warmer accommodates (1)
12.75” x 20.75” x 6” deep pan (32.4cm x 52.7cm x 15.2). Pans are provided
by others. NOTE: Drains are optional.
Control Panel is die-stamped stainless steel and is installed on the exterior at
the inner corner of the “L”.
Electrical connection is 208-230 volts, 60 Hertz, single phase. Unit has 10’
(2.7m) long cord and NEMA 6-30P plug.
Unit is mounted on 6” (15.2cm) flanged stainless steel feet.
NOTE: Model SLT4-L has the “L” corner on the left hand side of the server;
model SLT4-R has the “L” corner on the right hand side of the server.
Optional Accessories and Modifications
Q) *115/208 volt, 15 amp electrical outlet with 10 amp breaker
J) 12” (30.5cm) wide stainless steel overshelf
E) Stainless steel fold-down work shelf
QQ) Drains plumed to a common valve
* Inclusion of this option will alter
electrical specifications of the unit.
Model SLT4
TrimLine L-Shaped Heated Tray Make-Up Serving Counters
SLT4