Delfield Meridian MFR1-G Specifications

Download Specifications of Delfield Meridian MFR1-G Freezer for Free or View it Online on All-Guides.com. This version of Delfield Meridian MFR1-G Manual compatible with such list of devices, as: Meridian MFR1-G, Meridian MFR1R-G, Meridian MFR2-GH, Meridian MFR3R-G, Meridian MFR3R-GH

Delfield Meridian MFR1-G Specifications - Page 1
1
Delfield Meridian MFR1-G Specifications - Page 2
2
MERIDIAN SERIES
®
GLASS DOOR REACH IN FREEZERS
Project __________________________
Item ____________________________
Quantity _________________________
CSI Section 11400
MERIDIAN SERIES
®
Glass Door Reach-in Freezers
980 S. Isabella Road
Mt. Pleasant, MI 48858
www.delfield.com
Phone: 800-733-8948
Fax: 800-669-0619
Email: info@delfield.com
Approval _________________
Date ____________________
SPECIFICATIONS
Exterior: Cabinet front, and shroud shall be 22-gauge
stainless steel. Exterior sides shall be aluminum. Facing
of shroud shall be easily removable without the use of
tools.
Cabinet interior shall be anodized aluminum. Bottom &
top of liner shall be die-stamped to provide radius corners
and a recessed bottom. Base shall be fully insulated with
high-density foamed in place polyurethane.
Interior shall have three epoxy-coated wire shelves per
door section. Shelf support pilasters shall be heavy-duty
with shelves adjustable at 1.0” (2.5 cm) increments. Unit
is mounted on 6” (15.24cm) metal legs.
Doors: Unit is provided with hinged glass front
door(s). Doors on freezer units are constructed with
double-pane low E, Argon filled tempered thermopane
glass. Glass doors are constructed with a combination
of extruded aluminum & PVC, and are provided with
magnetic gaskets. Doors will have self-closing hinges and
continuous handle along vertical dimension of door(s).
Glass door constructed to eliminate need for heater wires.
• Please specify right or left hand hinging at time of order.
Mechanical controls shall be located behind a removable
shroud facing.
Freezers: All components are mounted to the exterior
cabinet ceiling, outside the food zone and are assembled
as one piece and can be removed as one piece.
Environmentally friendly R404A refrigerant is used. System
has the capability of maintaining between -5˚F and 0˚F in
heavy use food service operations. Refrigerant is metered
using a highly responsive thermostatic expansion valve.
Evaporator defrost is automatic using a time initiated,
time/temperature terminated system with electric heaters.
Evaporator condensate is eliminated using an energy
efficient hot gas system.
Single Voltage Models Only: Electrical connections
shall be 115 volt, 60 hertz, single phase, with an
eight ft. (2.4m) long electrical cord & plug as shown
on reference chart. Cord & plug shall be wired to the
junction box on top of the unit.
Dual Voltage Models Only: Electrical connections
shall be 115/208-230 volt, 60 hertz, single phase, and
must be hard-wired to the junction box located on top
of the unit.
MODELS:
MFR1-G Single section MFR2-G Two section MFR3-G Three section
Full height door Full height doors Full height doors
MFR1R-G Remote MFR2R-G Remote MFR3R-G Remote
MFR1-GH Single section MFR2-GH Two section MFR3-GH Three section
Half height door Half height doors Half height doors
MFR1R-GH Remote MFR2R-GH Remote MFR3R-GH Remote
MRR2-GHSH
STANDARD FEATURES
Shroud removes without tools, for easy condenser
maintenance
Built in door locks
Durable stainless steel doors and shroud, for lasting good
looks
New high-density foam insulation cuts energy costs
Big, easy grip handles are easy to find, don’t intrude into
kitchen traffic
Attractive aluminum side panels are easy to clean and
corrosion resistant
Heavy-duty hinges with stay open feature
Refrigeration system is located outside the food zone, more
space for product storage
Mini watt door heaters eliminate condensation with minimal
energy cost
Exterior digital thermometer with high/low temperature
alarm
Tri seal door gaskets lower energy costs with a unique
insulating design
Epoxy coated shelves—corrosion resistant, 300-lb. capacity.
Flexible placement on 1” centers allows maximum storage
Aluminum interior stands up to food acids without
corroding
Lots of interior storage space for the money
Rugged metal legs, adjustable to compensate for
uneven floors
OPTIONS AND ACCESSORIES
Stainless steel exterior sides
Stainless steel interior
Stainless steel kick plate
Door and end laminate
Stainless steel exterior back
Digital thermometer
TXV
Chrome Shelves
Tray Slides
220/50/1 electrical
Electronic control
Stainless steel legs
Casters