Delfield SARPT1-G Specifications

Download Specifications of Delfield SARPT1-G Freezer, Refrigerator for Free or View it Online on All-Guides.com. This version of Delfield SARPT1-G Manual compatible with such list of devices, as: SARPT1-G, SARPT2-GH, SSRPT1-GH, SSRPT2-G, SSRPT3R-GH

Delfield SARPT1-G Specifications - Page 1
1
Delfield SARPT1-G Specifications - Page 2
2
SPECIFICATION LINE: SELF-CONTAINED HINGED GLASS DOOR PASS-THRU REFRIGERATOR
Project __________________________
Item ____________________________
Quantity _________________________
CSI Section 11400
Specification Line
Self-Contained Hinged Glass Door Pass-Thru Refrigerator
980 S. Isabella Road
Mt. Pleasant, MI 48858
www.delfield.com
Phone: 800-733-8948
Fax: 800-669-0619
Email: info@delfield.com
Approval _________________
Date ____________________
SARPT1-G
SPECIFICATIONS
Exterior: Cabinet exterior sides, front and shroud
shall be 22-gauge, corrosion resistant stainless steel.
Upper shroud shall be hinged, with stay-open feature
to provide easy access to refrigeration system.
Interior: Cabinet interior shall be 22-gauge, corrosion
resistant stainless steel (SS models) or heavy gauge
aluminum (SA models). Bottom and top surfaces are
die stamped to provide radius corners and recessed
floor. Three chrome plated wire shelves are provided
per section. Shelves rest on clips which are adjustable
in 1” increments on stainless steel pilasters affixed to
the cabinet interior. Pilasters are removable without
tools for cleaning. Interior light mounted to the
interior ceiling is controlled automatically through
a switch mounted in the hinge assembly to protect
against breakage. Door openings are protected with
heavy gauge stainless steel breaker strips. An air duct
is mounted to the ceiling assuring low velocity, even air
movement throughout the cabinet interior.
Doors: Double paned tempered thermopane glass.
Constructed with a combination of extruded aluminum
and PVC. Each door has two edgemount, self-closing, cam
lift style hinges. Doors can be removed from the cabinet
without the use of tools. Door handle is continuous along
vertical dimension of the door. Door gaskets are magnetic
and mount to the door, snapping in place and removable
with out tools. Keyed door lock is mounted to the door.
Lock is mounted to the door. Lock engages into a heavy
duty strike mounted to the cabinet face.
Refrigeration system: All components are mounted
to the exterior cabinet ceiling, outside the food zone and
are assembled as one piece and can be removed as one
piece. Environmentally friendly R404A refrigerant is used.
System has the capability of maintaining between 27˚F and
40˚F in heavy use food service operations. Refrigerant
is metered using a highly responsive thermostatic
expansion valve. System is controlled using Delfield’s
ACT-Advanced Control Technology electronic temperature
control, which provides improved pull down times,
reducing compressor cycling and longer compressor life
with lower energy consumption.
Control system uses adaptive defrost to assure
evaporator coil is free of ice and operating at optimum
efficiency. Evaporator condensate is eliminated using an
energy efficient hot gas system.
Electrical: Standard electrical connections shall be 115V,
60Hz, single phase. A 10’ cord and plug is supplied
attached to a junction box mounted on the exterior top
of the cabinet.
MODELS
SSRPT1-G 1 section stainless interior
full glass door
SSRPT1-GH 1 section stainless interior
half glass door
SARPT1-G 1 section aluminum interior
full glass door
SARPT1-GH 1 section aluminum interior
half glass door
SSRPT2-G 2 section stainless interior
full glass door
SSRPT2-GH 2 section stainless interior
half glass door
SARPT2-G 2 section aluminum interior
full glass door
SARPT2-GH 2 section aluminum interior
half glass door
SSRPT3R-G 3 section stainless interior
full glass door
SSRPT3R-GH 3 section stainless interior
half glass door
SARPT3R-G 3 section aluminum interior
full glass door
SARPT3R-GH 3 section aluminum interior
half glass door
STANDARD FEATURES
Stainless steel interior and exterior (SS)
Stainless steel exterior, aluminum interior (SA)
Built in door locks with heavy duty strikes
Exterior digital thermometer with high/low
temperature alarm
Easy to use electronic control
Three chrome plated wire shelves per section
10’ attached cord and plug standard on 115V units
6” adjustable stainless steel legs
Stainless steel breaker strips
Energy savings door heater switch
Two year parts & labor warranty
OPTIONS AND ACCESSORIES
Security package
Flourescent light
Additional shelves
Tray slides
Stainless steel back
Laminate on front, sides and back
Bottom mount electrical
Stainless steel banking strip
Heat shield end
Stainless steel kick plate
Laminate kick plate
High humidity evaporator coil
4” stainless steel utility base
Alarm control display
220-50-1 electrical
220-60-1 electrical