• Home
• Brands
• Delfield Manuals
• Delfield SPH-40
• Delfield SPH-40 Specifications

Delfield SPH-40 Specifications

Download Specifications of Delfield SPH-40 Merchandiser for Free or View it Online on All-Guides.com.

1

2

SPH SHELLEYSPEED™ HEATED MODULE, 34”HEIGHT, 30” DEPTH

Project __________________________

Item ____________________________

Quantity _________________________

CSI Section 11400

SPH

Heated Module, 34” height, 30” depth

980 S. Isabella Road

Mt. Pleasant, MI 48858

www.delfield.com

Phone: 800-733-8948

Fax: 800-669-0619

Email: info@delfield.com

Approval _________________

Date ____________________

SPECIFICATIONS

MODELS

❑ SPH-40 40” length, heated module, 34” height, 30” depth

❑ SPH-50 50” length, heated module, 34” height, 30” depth

❑ SPH-64 64” length, heated module, 34” height, 30” depth

SPH-50

Unit shown without standard lid locking device

Exterior: Exterior body is constructed of 18-gauge

stainless steel side panels or 18-gauge galvanized

reinforced laminate panels. 14-gauge galvanized

bottom. All exterior side panels are reinforced with

overlapping corners and are welded in place. All

insert cutouts are reinforced with 14-gauge galvanized

channel supports.

Exterior top is constructed of 14-gauge stainless steel,

welded, ground and polished into one integral unit.

Top is fabricated with square exterior corners with

fully hemmed nosing on operator and customer sides.

Stainless steel fully retractable interlocks are installed

on opposing corners and locks units into a complete

serving system.

Interior: Heated pan is 14” deep one-piece constructed

stainless steel tank. Louvered front and rear sides

are for re-circulated forced air heating. The tank is

separated from the top by a polycarbonate thermal

break keeping surface temperatures below 90 degrees.

Entire tank is fully insulated with foamed in place high-

density polyurethane foam.

Heating System: Convected air type heating

system with squirrel cage blower and on/off switch.

Components include hi-limit protection circuit, (2) 900-

watt fin style heating elements and a night switch.

A stainless steel access panel is located in the bottom

of the unit allowing complete access to the heating

elements. The fan is accessible through the operator

side of the control panel. Units meet NSF 4 temperature

requirements.

Night switch is located on the operator side in the upper

right corner behind a spring-hinged cover. On/off

switch and adjustable range thermostat is located on the

operator side in a recessed panel with a hinged cover

plate.

Lids: Lids are constructed of stainless steel and are

insulated with polyurethane foam insulation. The lid

thickness is 3/4”. Lid handle shall be black, recessed

ABS. Lids are removable without the use of tools.

Stainless steel lid locking bar is standard. Bar has

locking handle at one end and mounts to clips, which

are bolted to the top of the cabinet. The locking bar

extends the length of the unit. Entire assembly can be

removed during the serving period.

Electrical: Electrical connections shall be 120 volt, 60

hertz, single phase. Unit shall have a 9’ long electrical

cord and NEMA 5-30 plug. Cord is standard on the

operator right side of the equipment. Double cord hook

is located on the bottom of the unit.

Casters: Unit is mounted on 5” (12.7cm) diameter

swivel polyurethane casters with non-marking tires

and plate brakes. Casters are bolted directly to the

14-gauge bottom of the base. Overall height of caster

assembly is 6.00” (15.2cm).

Styling: Units are standard with 18-gauge stainless

steel exterior sides. Laminate is an option available at

no additional charge. Decal packages and canopies are

also available.

STANDARD FEATURES

• 14-gauge stainless steel top standard

• 34” counter height, 30” depth

• 9’ long cord and plug are supplied standard

• 18-gauge stainless steel exterior standard

• Electrical: 120 volt, 60 cycle, single phase

• Removable sliding lids (two per unit) standard

• Standard on 5” diameter polyurethane swivel casters

• Stainless steel fully retractable interlock provided as standard

• Basket rack system is standard

• A wide selection of laminate colors available at no additional

charge

• Laminate selection has 18-gauge galvanized base, 16-gauge

coved corner supports to protect laminate

• Stay cool surface: Top is designed to stay below 90˚,

making it safe to touch

• Fin style element maintains even heating temperatures

throughout the interior of the cabinet

• Meets NSF2, NSF4, UL and CEC standards

• One-year parts and 90 day labor standard warranty.

Additional warranties available

• Holds baskets size, 13.25” x 20.5” x 2.5” or

13.25” x 20.5” 4.75”

OPTIONS AND ACCESSORIES

❑ Single tier merchandiser (Unheated)

❑ Double tier merchandiser (Unheated)

❑ 16”x30” stainless steel drop tray shelf

❑ Cash shelf

❑ Tray slides

• V-style

• Tubular bar

❑ 2” Wire basket (13.25”x20.5”x2.5”)

❑ 4” Wire basket (13.25”x20.5”x4.75”)

❑ Decal package

❑ Canopy

❑ 208 Volt electrical