• Home
• Brands
• Delfield Manuals
• Delfield F15SC48N
• Delfield F15SC48N Specifications

Delfield F15SC48N Specifications

Download Specification sheet of Delfield F15SC48N Display Case, Refrigerator for Free or View it Online on All-Guides.com.

1

2

F15 SEE-THROUGH SELF-CONTAINED REFRIGERATED DISPLAY CASES

Project __________________________

Item____________________________

Quantity _________________________

CSI Section 11400

F15 Serview

See-Through Self-Contained Refrigerated Display Cases

980 S. Isabella Road

Mt. Pleasant, MI 48858

www.deleld.com

Phone: 800-733-8948

Fax: 800-669-0619

Email: info@deleld.com

Approval _________________

Date____________________

F15SC48N

SPECIFICATIONS

Top is constructed of 16-gauge stainless steel, with integral front

and rear nosing. Interior sub-top is made of ABS plastic and 2.00”

die foam is laminated between the interior and exterior top.

Refrigerated base interior back and bottom is constructed of a

22-gauge 2BF stainless steel. Exterior sides, bottom and back are

made of 22 gauge galvanized steel. Both left and right interior

sides are formed of ABS plastic. The base is injected with 2.00”

of high density polyurethane foam between the exterior and

interior. Refrigerated base fronts are made of .095” thick ABS

thermoformed plastic and backed up by ridged polyurethane

water blown injection molded frames. The frames are an excellent

thermo-break and superior structural material for fastening doors

and drawers. Unit is furnished with one epoxy coated shelf for

each door. Exterior machine compartment side is constructed

with18-gauge galvanized steel.

Exterior door fronts are made of 22- gauge stainless steel; and has

an interior made of ABS plastic with formed in channels to house

the snap-in dart style vinyl magnetic gasket. Each door front is

injected with 1.87” of high density polyurethane foam between

the exterior and interior. Handles are recessed black plastic and

held in with a positive lock system.

Display section exterior sides are made of 18-gauge stainless steel.

Exterior display section top to be 22-gauge galvanized metal. Interior

sides are made of .095” thick ABS plastic with molded shelf supports.

The interior bottom is constructed with stainless steel for long lasting

durability. Display section is fully insulated with high density polyure-

thane foam between the interior and exterior. Four adjustable epoxy

coated wire shelves are provided for the display section. An on/off

switch for the display section light(s) is located at the right end of the

front facing, above the display section doors.

Display case refrigeration system consists of a full-length top mounted

coil with multiple fans circulating the air throughout the cabinet utilizing

a thermostatic control. An ABS plastic drip pan is placed below the coil

with a clear drain hose for running the condensation to the lower base

mechanical section.

Front of the display section is equipped with two sliding and removable

self-closing .50” thick argon lled, low-e glass doors with a warm edge

spacer. The vertical outsides of each door tuck into an extruded channel

running vertically up each side. Front nosing to be 20-gauge stainless

steel.

Unit is supported with two 14-gauge leg rails that run the entire

length of the unit. Leg rails are welded to the bottom side of the

unit and are tied together with two 12-gauge braces running front

to back. Caster/leg boxes are welded inside the leg rail and 6.12”

adjustable tapered legs are mounted as standard with (4) 5/16”

bolts.

Self-contained models have a pre-wired condensing unit housed in

a machine compartment, standard on right, with an easy removable

louver panel for quick access. Machine compartment also is supplied

with an 8’ cord and plug and electrical junction box.

Base interior cabinet is cooled with mullion style coated blower

coil(s) mounted between each door/drawer section for very even air

and temperature control. Blower coils encloses refrigeration lines,

evaporator coil, expansion valve, thermostat and fans. Interior

refrigerated base cabinet and display section to maintain 36º to 40º

temperatures at 100º ambient room temperature.

Back has (1) .62” thick argon lled, low-e glass panel.

MODELS:

 F15SC48N 24” Deep Upper

Display Section

 F15SC72N 24” Deep Upper

Display Section

STANDARD FEATURES

• Display exterior sides are made of 18-gauge stainless

steel

• ABS plastic interior sides with molded shelf supports

• (4) adjustable epoxy coated wire shelves

• On/off switch for the display section light(s)

• Top mount coil with multiple fans circulating the air

throughout the cabinet

• Display section runs off a thermostatic control

• Sliding and removable self-closing .50” thick argon

filled, low-E, warm edge insert, thermopane glass doors

with left and right vertical gasket

BASE

• Standard heavy duty units have unfinished base ends

• Base top is constructed of 16-gauge stainless steel

• High density polyurethane foam throughout unit

• Refrigerated base fronts are made of .095” thick

ABS plastic backed by rigid polyurethane water blown

injection molded frames (NO WOOD)

• Epoxy coated shelf for each door

• Exterior door fronts are stainless steel with ABS plastic

liner

• Snap-in dart style vinyl magnetic gasket

• Door handles are recessed black plastic and held in

with a positive lock system

• 14-gauge leg rails that run the entire length of the

unit

• 6.12” adjustable full stainless steel legs and bullet

feet

• Base interior cabinet is cooled with mullion style

coated blower coil(s)

• Environmentally friendly HFC-404A refrigerant

OPTIONS AND ACCESSORIES

 Stainless steel back

 Stainless steel end

 Laminate facing

 Laminate back

 Laminate end

 220 volt/50 cycle - inclusion of this option will

alter specications