• Home
• Brands
• Delfield Manuals
• Delfield F5PR48N
• Delfield F5PR48N Specifications

Delfield F5PR48N Specifications

Download Specifications of Delfield F5PR48N Display Case, Refrigerator for Free or View it Online on All-Guides.com.

1

2

F5 24” DEEP PASS THROUGH REMOTE DROP IN REFRIGERATED DISPLAY CASES

Project __________________________

Item____________________________

Quantity _________________________

CSI Section 11400

F5 Serview Drop In

24” Deep Pass Through Remote Refrigerated Display Cases

980 S. Isabella Road

Mt. Pleasant, MI 48858

www.deleld.com

Phone: 800-733-8948

Fax: 800-669-0619

Email: info@deleld.com

Approval _________________

Date____________________

F5PR48N

SPECIFICATIONS

Display section exterior sides are made of 18-

gauge stainless steel. Exterior display section top

to be 22-gauge galvanized metal. Interior sides

are made of .095” thick ABS plastic with molded

shelf supports. The interior bottom is constructed

with stainless steel for long lasting durability.

Display section is fully insulated with high density

polyurethane foam between the interior and

exterior. (4) Adjustable epoxy coated wire shelves

are provided for the display section. An on/off

switch for the display section light(s) is located at

the right end of the front facing, above the display

section doors.

Display case refrigeration system consists of a full-

length top mounted evaporator coil with multiple

fans circulating the air throughout the cabinet

utilizing a thermostatic control. Refrigeration lines are

piped to a single point connection with expansion valve.

An ABS plastic drip pan is placed below the coil with a

clear drain hose for running the condensation to the

lower base mechanical section.

Front of the display section is equipped with two sliding

and removable self-closing .50” thick argon lled, low-

e glass doors with a warm edge spacer. The vertical

outsides of each door tuck into an extruded channel

running vertically up each side. Front and rear nosing

to be 20-gauge stainless steel.

Refrigeration system components are HFC-404A. Dis-

play cabinet blower coil assembly shall have a coated

evaporator coil and fans. Interior refrigerated base

cabinet and display section to maintain 36 to 40 degree

temperatures at 100-degree ambient room tempera-

ture. Electrical connections are 115V-60H-1PH; unit

must be hard wired to a junction box.

Back has (2) sliding and removable self-closing .50”

thick argon lled, low-e glass doors with a warm

edge spacer.

MODELS:

 F5PR48N 24” Deep Remote Drop In

Display Section

 F5PR72N 24” Deep Remote Drop In

Display Section

STANDARD FEATURES

• Display exterior sides are made of 18-gauge stainless

steel

• ABS plastic interior sides with molded shelf supports

• (4) adjustable epoxy coated wire shelves

• On/off switch for the display section light(s)

• Top mount coil with multiple fans circulating the air

throughout the cabinet

• Display section runs off a thermostatic control

• Sliding and removable self-closing .50” thick argon

filled, low-E, warm edge insert, thermopane glass doors

with left and right vertical gasket

• High density polyurethane foam throughout unit

• Three adjustable epoxy coated shelves for each door

• Single service display section with mirrored back

• Environmentally friendly HFC-404A refrigerant

OPTIONS AND ACCESSORIES

 48” shelf (48” long units only)

 72” shelf (72” long units only)

 Mirrored interior on pass-through doors (48”)

 Mirrored interior on pass-through doors (72”)

 220 volt/50 cycle - inclusion of this option will

alter specications