Delfield KCM-36 Specifications

Download Specifications of Delfield KCM-36 Refrigerator for Free or View it Online on All-Guides.com. This version of Delfield KCM-36 Manual compatible with such list of devices, as: KCM-36, KCM-50, KCM-60, KCM-74

Delfield KCM-36 Specifications - Page 1
1
Delfield KCM-36 Specifications - Page 2
2
Short Form Specifications
Exterior Body is seamless, one-piece molded fiberglass, having perfectly smooth
exterior surface with all corners fully rounded. The fiberglass reinforced polyester
(F.R.P.) is molded with permanent color. Stress points are internally reinforced.
Exterior top is constructed of 14-gauge stainless steel, welded, ground and
polished into one integral unit. Top is fabricated with square exterior corners.
Top has one (KCM-36), two (KCM-50), three (KCM-60) or four (KCM-74)
die-stamped openings and is provided with hinged removable lids. Lids are
constructed of stainless steel and have a rubber gasket seal.
Refrigerated Compartment; have water-tight inner liner constructed of
22-gauge stainless steel, with radius corners and 1.5(3.8cm) of polyure-
thane insulation. Compartment is equipped with a drain plumbed to a
drain valve located in the bottom of the unit. Refrigerated compartment
is equipped with automatic self leveling, field adjustable elevators. Divider
trays are supplied.
Refrigeration; copper refrigeration coils are attached to outside of inner liner.
Unit is refrigerated by self-contained, 115 volt, 60 Hertz, single phase hermeti-
cally sealed condensing unit with thermostatic control. Unit is wired with a
3-wire, grounded, maximum 10’ (3m) 120 volt cord and plug. Refrigeration
system use HFC-134A refrigerant
Casters; unit is mounted on 5(12.7cm) diameter swivel casters with non-
marking polyolefin tires and plate brakes. Overall height of caster assembly
is 6(15.2cm).
Optional Accessories and Modifications
A) 12” (30.5cm) wide stainless steel fold-down tray slide
C) 10” (25.4cm) wide three-bar fold-down tray slide
E) 10" (25.4cm) wide stainless steel fold-down work shelf
F) Line-up interlock device
R) 10 x 17” x 4” (25.4cm x 43.2cm x 10.2cm) deep chrome wire baskets
S) Stainless steel lid locking device with “T” handle
U) 14” x 30” (35.6cm x 76.2cm) stainless steel end drop shelf
UU) Molded fiberglass trim strips
V) 6” (15.2cm) high adjustable stainless steel legs in lieu of casters
Model KCM-50
shown with option C
Mobile Milk Counters
KCM
PROJECT
ITEM #
QUANTITY DATE
APPROVAL
The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 Fax (800) 669-0619 www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.