Delfield Meridian MRR1-GH Specifications

Download Specifications of Delfield Meridian MRR1-GH Refrigerator for Free or View it Online on All-Guides.com. This version of Delfield Meridian MRR1-GH Manual compatible with such list of devices, as: Meridian MRR1-GH, Meridian MRR1R-G, Meridian MRR2-GH, Meridian MRR2R-GH, Meridian MRR3-GH

Delfield Meridian MRR1-GH Specifications - Page 1
1
Delfield Meridian MRR1-GH Specifications - Page 2
2
MERIDIAN SERIES
®
GLASS DOOR REACH IN REFRIGERATORS
Project __________________________
Item ____________________________
Quantity _________________________
CSI Section 11400
MERIDIAN SERIES
®
Glass Door Reach-in Refrigerators
980 S. Isabella Road
Mt. Pleasant, MI 48858
www.delfield.com
Phone: 800-733-8948
Fax: 800-669-0619
Email: info@delfield.com
Approval _________________
Date ____________________
SPECIFICATIONS
Exterior: Cabinet front, and shroud shall be 22-gauge
stainless steel. Exterior sides shall be aluminum. Facing
of shroud shall be easily removable without the use of
tools.
Cabinet interior shall be anodized aluminum. Bottom
& top of liner shall be die-stamped to provide
radius corners and a recessed bottom. Base shall be
fully insulated with high-density foamed in place
polyurethane.
Interior shall have three epoxy-coated wire shelves per
door section. Shelf support pilasters shall be heavy-duty
with shelves adjustable at 1.0” (2.5 cm) increments.
Unit is mounted on 6” (15.24cm) metal legs.
Doors: Unit is provided with hinged glass front door(s).
Doors on refrigerated units are constructed with double-
pane tempered thermopane glass. Glass doors are
constructed with a combination of extruded aluminum
& PVC, and are provided with magnetic gaskets. Doors
will have self-closing hinges and continuous handle along
vertical dimension of door(s). Glass door constructed to
eliminate need for heater wires.
• Please specify right or left hand hinging at time of order.
Mechanical controls shall be located behind a removable
shroud facing.
Refrigeration: All components are mounted to the
exterior cabinet ceiling, outside the food zone and are
assembled as one piece and can be removed as one piece.
Environmentally friendly R404A refrigerant is used. System
has the capability of maintaining between 27˚F and 40˚F in
heavy use food service operations. Refrigerant is metered
using a highly responsive thermostatic expansion valve.
System is controlled using Delfield’s ACT-Advanced Control
Technology electronic temperature control, which provides
improved pull down times, reducing compressor cycling and
longer compressor life with lower energy consumption.
Control system uses adaptive defrost to assure
evaporator coil is free of ice and operating at optimum
efficiency. Evaporator condensate is eliminated using
an energy efficient hot gas system.
Single Voltage Models Only: Electrical connections
shall be 115 volt, 60 hertz, single phase, with an
eight ft. (2.4m) long electrical cord & plug as shown
on reference chart. Cord & plug shall be wired to the
junction box on top of the unit.
Dual Voltage Models Only: Electrical connections
shall be 115/208-230 volt, 60 hertz, single phase, and
must be hard-wired to the junction box located on top
of the unit.
MODELS:
MRR1-G Single section MRR2-G Two section MRR3-G Three section
Full height door Full height doors Full height doors
MRR1R-G Remote MRR2R-G Remote MRR3R-G Remote
MRR1-GH Single section MRR2-GH Two section MRR3-GH Three section
Half height door Half height doors Half height doors
MRR1R-GH Remote MRR2R-GH Remote MRR3R-GH Remote
MRR2-GHSH
STANDARD FEATURES
Shroud removes without tools, for easy condenser
maintenance
Built in door locks
Durable stainless steel doors and shroud, for lasting good
looks
New high-density foam insulation cuts energy costs
Big, easy grip handles are easy to find, don’t intrude into
kitchen traffic
Attractive aluminum side panels are easy to clean and
corrosion resistant
Heavy-duty hinges with stay open feature
Refrigeration system is located outside the food zone, more
space for product storage
Mini watt door heaters eliminate condensation with minimal
energy cost
Exterior digital thermometer with high/low temperature
alarm
Tri seal door gaskets lower energy costs with a unique
insulating design
Epoxy coated shelves—corrosion resistant, 300-lb. capacity.
Flexible placement on 1” centers allows maximum storage
Aluminum interior stands up to food acids without
corroding
Lots of interior storage space for the money
Rugged metal legs, adjustable to compensate for
uneven floors
OPTIONS AND ACCESSORIES
Stainless steel exterior sides
Stainless steel interior
Stainless steel kick plate
Door and end laminate
Stainless steel exterior back
Digital thermometer
TXV
Chrome Shelves
Tray Slides
220/50/1 electrical
Electronic control
Stainless steel legs
Casters