Delfield Meridian MRR1N-S Specifications

Download Specifications of Delfield Meridian MRR1N-S Refrigerator for Free or View it Online on All-Guides.com. This version of Delfield Meridian MRR1N-S Manual compatible with such list of devices, as: Meridian MRR1N-S, Meridian MRR1NR-SH, Meridian MRR2N-S, Meridian MRR2N-SH, Meridian MRR2NR-S

Delfield Meridian MRR1N-S Specifications - Page 1
1
Delfield Meridian MRR1N-S Specifications - Page 2
2
MERIDIAN SERIES
®
SOLID DOOR NARROW REACH-IN REFRIGERATORS
Project __________________________
Item ____________________________
Quantity _________________________
CSI Section 11400
MERIDIAN SERIES
®
Solid Door Narrow Reach-In Refrigerators
980 S. Isabella Road
Mt. Pleasant, MI 48858
www.delfield.com
Phone: 800-733-8948
Fax: 800-669-0619
Email: info@delfield.com
Approval _________________
Date ____________________
MRR1N-S
Shown with optional left-hand hinging.
SPECIFICATIONS
Exterior: Cabinet front and shroud shall be 22-gauge
stainless steel. Exterior sides shall be aluminum. Facing
of shroud shall be easily removable without the use of
tools.
Cabinet interior shall be anodized aluminum. Bottom &
top of liner shall be die-stamped to provide radius corners
and a recessed bottom. Base shall be fully insulated with
high-density foamed in place polyurethane.
Interior shall have three epoxy-coated wire shelves per
door section. Shelf support pilasters shall be heavy-duty
with shelves adjustable at 1.0” (2.5 cm) increments. Unit
are mounted on 6” (15.24cm) metal legs.
Doors: Solid doors shall have a 22-gauge stainless steel
exterior & anodized aluminum interior liner. Doors shall
be fully insulated with high density foamed in place
polyurethane. Each door shall have two self-closing, cam-
lift style hinges. Doors shall be easily removable without
use of tools. Door gaskets shall be magnetic snap-in
style to allow simple replacement. Door handles shall
be recessed.
• Please specify right or left hand hinging at time of
order.
Mechanical controls shall be located behind a
removable shroud facing.
Refrigeration: All components are mounted to
the exterior cabinet ceiling, outside the food zone
and are assembled as one piece and can be removed
as one piece. Environmentally friendly R404A
refrigerant is used. System has the capability of
maintaining between 27˚F and 40˚F in heavy use
food service operations. Refrigerant is metered using
a highly responsive thermostatic expansion valve.
System is controlled using Delfield’s ACT-Advanced
Control Technology electronic temperature control,
which provides improved pull down times, reducing
compressor cycling and longer compressor life with lower
energy consumption.
Control system uses adaptive defrost to assure
evaporator coil is free of ice and operating at optimum
efficiency. Evaporator condensate is eliminated using an
energy efficient hot gas system.
Single Voltage Models Only: Electrical connections
shall be 115 volt, 60 hertz, single phase, with an
eight ft. (2.4m) long electrical cord & plug as shown
on reference chart. Cord & plug shall be wired to the
junction box on top of the unit.
Dual Voltage Models Only: Electrical connections
shall be 115/208-230 volt, 60 hertz, single phase, and
must be hard-wired to the junction box located on top
of the unit.
MODELS:
MRR1N-S Single section MRR2N-S Two section
Full height door Full height doors
MRR1NR-S Remote MRR2NR-S Remote
MRR1N-SH Single section MRR2N-SH Two section
Half height door Half height doors
MRR1NR-SH Remote MRR2NR-SH Remote
STANDARD FEATURES
Shroud removes without tools, for easy condenser
maintenance
Built in door locks
Durable stainless steel doors and shroud, for lasting good
looks
New high-density foam insulation cuts energy costs
Big, easy grip handles are easy to find, don’t intrude into
kitchen traffic
Attractive aluminum side panels are easy to clean and
corrosion resistant
Heavy-duty hinges with stay open feature
Refrigeration system is located outside the food zone, more
space for product storage
Mini watt door heaters eliminate condensation with minimal
energy cost
Exterior digital thermometer with high/low temperature
alarm
Tri seal door gaskets lower energy costs with a unique
insulating design
Epoxy coated shelves—corrosion resistant, 300-lb. capacity.
Flexible placement on 1” centers allows maximum storage
Aluminum interior stands up to food acids without
corroding
Lots of interior storage space for the money
Rugged metal legs, adjustable to compensate for
uneven floors
OPTIONS AND ACCESSORIES
Stainless steel exterior sides
Stainless steel interior
Stainless steel kick plate
Door and end laminate
Stainless steel exterior back
Digital thermometer
TXV
Chrome Shelves
Tray Slides
220/50/1 electrical
Electronic control
Stainless steel legs
Casters