Dell 1815dn - All-in-one Laser Printer Owner's Manual
Download Owner's manual of Dell 1815dn Multifunction Mono Laser Printer All in One Printer, Printer for Free or View it Online on All-Guides.com.
Brand: Dell
Category: All in One Printer , Printer
Type: Owner's manual
Model: Dell 1815dn Multifunction Mono Laser Printer , Dell 1815 Mono Laser , Dell 1815dn - All-in-one Laser Printer
Pages: 150 (4.01 Mb)
Download Dell 1815dn Multifunction Mono Laser Printer Owner's manual
32 Understanding the Printer Software
Installing Dell Software For Local Printing
A local printer is a printer attached to your computer using a USB cable. If your printer is attached to a
network instead of your computer, skip this step and go to "Installing Dell Software For Network
Printing" on page 35.
NOTE: If you attach a USB printer cable while your printer and computer are powered on, the Windows hardware
wizard launches immediately. Cancel the screen and use the
drivers and utilities CD
to install the Dell software.
1
Make sure that the printer is connected to your computer and powered on. Close all unnecessary
programs.
NOTE: If the printer is not connected to your computer when you install the Dell software, the No Printer
Found screen appears. Follow the instructions to install the software.
2
Insert the
drivers and utilities CD
.
3
If required, press the
Language
button to select a language.
4
Select
Personal Installation
and click
Next
.
5
Select
Typical Installation
and click
Next
to install the
User’s Guide
, the printer drivers, scanner driver
and PaperPort as the default settings.
To install selected software including the Postscript driver, select
Custom Installation
and click
Next
.
You can change the destination folder.
6
When the installation is complete, print a test page. Click
Finish
and close the wizard. You are now
ready to print.
If you did not cancel the hardware wizards, refer to the following instruction for installing the printer
driver for your operating system.
Windows XP:
1
Make sure that the printer is connected to your computer and powered on.
2
When the hardware wizard screen appears, insert the
drivers and utilities CD
and click
Next
.
NOTE: For each wizard that appears, select Recommended, click Next, select CD-ROM Drives, and then
click Next through the wizard screens.
3
The scanner driver is automatically loaded first from
D:\1815\Scan\WINXP2K\p3scan.inf
, where “D”
is your CD drive.
4
Click
Next
.
5
Click
Finish
, and a second hardware wizard appears. The printer driver is automatically loaded from
D:\1815\Printer\GDI\WinXP\delr1.inf
, where “D” is your CD drive.
6
Click
Next
, and then click
Finish
.