Dell Latitude X300 Notice
Download Operation & user’s manual of Dell Latitude X300 Battery Charger, Laptop for Free or View it Online on All-Guides.com.
Brand: Dell
Category: Battery Charger , Laptop
Type: Operation & user’s manual for Dell Latitude X300
Pages: 113 (2.26 Mb)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
If you cannot eject the CD or DVD/CD-RW drive tray
If you hear an unfamiliar scraping or grinding sound
If the DVD/CD-RW drive stops writing
If you have problems with a hard drive
PC Card Problems
If a drive error message appears, see "Error Messages" for an explanation.
Run the IDE Drives tests as described in the Dell Diagnostics.
1. Ensure that the computer is turned off.
2. Straighten a paper clip and insert one end into the eject hole at the front of the drive; push firmly until the tray is partially ejected.
3. Gently pull out the tray until it stops.
l Ensure that the sound is not caused by the program that is running.
l Ensure that the disk or disc is inserted properly.
Disable standby mode in Windows before writing to a CD-RW — Search for the keyword standby or hibernate in Windows Help or the Help
and Support Center.
Change the write speed to a slower rate — See the help files for your CD creation software.
Close all other open programs — Closing all other open programs before writing to the CD-RW may alleviate the problem.
Allow the computer to cool before turning it on — A hot hard drive may prevent the operating system from starting. Try allowing the
computer to return to room temperature before turning it on.
Check the drive for errors
l Run the Windows error-checking tool:
1. In Windows XP, click the Start button and click My Computer. In Windows 2000, double-click My Computer.
2. Right-click the drive letter (local disk) that you want to scan for errors, and then click Properties.
3. Click the Tools tab.
4. Under Error-checking, click Check Now.
5. Click Start.
l Run the IDE Drives tests as described in the Dell Diagnostics.
Check the PC Card — Ensure that the PC Card is properly inserted into the connector.
Ensure that the card is recognized by Windows
®
— Double-click the Safely Remove Hardware (Unplug or Eject Hardware in Windows
2000) icon in the Windows taskbar. Ensure that the card is listed.
Run the PC Card diagnostics test — See the documentation that came with the PC Card for instructions if a diagnostics test was provided
with the card.