Dell PowerEdge 1900 Installation Manual

Download Installation information of Dell 2950 Computer Accessories, Desktop for Free or View it Online on All-Guides.com. This version of Dell 2950 Manual compatible with such list of devices, as: 2950, PowerEdge 1950, 1900, 2900

Brand: Dell

Category: Computer Accessories , Desktop , Server

Type: Installation information

Model: Dell 2950 , Dell PowerEdge 1950 , Dell 1900 , Dell 2900

Pages: 11 (0.94 Mb)

Download Dell 2950 Installation information

Dell 2950 Installation information - Page 1
1
Dell 2950 Installation information - Page 2
2
Dell 2950 Installation information - Page 3
3
Dell 2950 Installation information - Page 4
4
Dell 2950 Installation information - Page 5
5
Dell 2950 Installation information - Page 6
6
Dell 2950 Installation information - Page 7
7
Dell 2950 Installation information - Page 8
8
Dell 2950 Installation information - Page 9
9
Dell 2950 Installation information - Page 10
10
Dell 2950 Installation information - Page 11
11
About Cautions
CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.
Microprocessor Installation Information
CAUTION: Any installation that requires removal of the system cover is intended solely to be performed
by trained service technicians. See your Product Information Guide for complete information about safety
precautions, working inside the computer and protecting against electrostatic discharge.
NOTICE: If the front of your system chassis is labeled with a "II," your system is upgradeable to the Quad-Core
Intel
®
Xeon
®
Processor 5300 series. See www.dell.com and support.dell.com for information on processor
availability and upgrade options for your system.
Prior to adding or replacing a processor, you must verify that the latest system BIOS and BMC firmware
versions are on your system. Loading the latest BIOS and BMC firmware versions will ensure that the
processor is fully supported.
NOTICE: Failure to update your system to the latest BIOS and BMC firmware versions prior to installing the
microprocessor can result in your system hanging during POST.
1
Check your system BIOS version in the System Setup program. See "Using the System Setup Program"
in the
Hardware Owner’s Manual
included on the CDs provided with your system or on
support.dell.com
.
2
Check the latest system BIOS version available on
support.dell.com
.
3
Download and flash the latest BIOS version if necessary.
4
Check your system BMC firmware version in the BMC Configuration Utility. To enter the BMC
Configuration Utility, press <Ctrl+E> when prompted during POST. For more information,
see the
BMC User’s Guide
included on the CDs provided with your system or on
support.dell.com
.
5
Check the latest system BMC firmware version available on
support.dell.com
.
6
Download and flash the latest BMC firmware, if necessary.
7
Install the processor. See "Installing System Components" in the
Hardware Owner’s Manual
included on the CDs provided with your system or on
support.dell.com
.
____________________
Information in this document is subject to change without notice.
© 2006–2007 Dell Inc. All rights reserved. Printed in the U.S.A.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.; Intel and Xeon are registered trademarks of Intel Corporation.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names
or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
March 2007