Dell M8428-K Hardware Reference Manual

Download Hardware reference manual of Dell M8428-K Chassis, Computer Accessories for Free or View it Online on All-Guides.com.

Dell M8428-K Hardware reference manual - Page 1
1
Dell M8428-K Hardware reference manual - Page 2
2
Dell M8428-K Hardware reference manual - Page 3
3
Dell M8428-K Hardware reference manual - Page 4
4
Dell M8428-K Hardware reference manual - Page 5
5
Dell M8428-K Hardware reference manual - Page 6
6
Dell M8428-K Hardware reference manual - Page 7
7
Dell M8428-K Hardware reference manual - Page 8
8
Dell M8428-K Hardware reference manual - Page 9
9
Dell M8428-K Hardware reference manual - Page 10
10
Dell M8428-K Hardware reference manual - Page 11
11
Dell M8428-K Hardware reference manual - Page 12
12
Dell M8428-K Hardware reference manual - Page 13
13
Dell M8428-K Hardware reference manual - Page 14
14
Dell M8428-K Hardware reference manual - Page 15
15
Dell M8428-K Hardware reference manual - Page 16
16
Dell M8428-K Hardware reference manual - Page 17
17
Dell M8428-K Hardware reference manual - Page 18
18
Dell M8428-K Hardware reference manual - Page 19
19
Dell M8428-K Hardware reference manual - Page 20
20
Dell M8428-K Hardware reference manual - Page 21
21
Dell M8428-K Hardware reference manual - Page 22
22
Dell M8428-K Hardware reference manual - Page 23
23
Dell M8428-K Hardware reference manual - Page 24
24
Dell M8428-K Hardware reference manual - Page 25
25
Dell M8428-K Hardware reference manual - Page 26
26
Dell M8428-K Hardware reference manual - Page 27
27
Dell M8428-K Hardware reference manual - Page 28
28
Dell M8428-K Hardware reference manual - Page 29
29
Dell M8428-K Hardware reference manual - Page 30
30
Dell M8428-K Hardware reference manual - Page 31
31
Dell M8428-K Hardware reference manual - Page 32
32
Dell M8428-K Hardware reference manual - Page 33
33
Dell M8428-K Hardware reference manual - Page 34
34
Dell M8428-K Hardware reference manual - Page 35
35
Dell M8428-K Hardware reference manual - Page 36
36
Dell M8428-K Hardware reference manual - Page 37
37
Dell M8428-K Hardware reference manual - Page 38
38
Dell M8428-K Hardware reference manual - Page 39
39
Dell M8428-K Hardware reference manual - Page 40
40
Dell M8428-K Hardware reference manual - Page 41
41
Dell M8428-K Hardware reference manual - Page 42
42
Dell M8428-K Hardware reference manual - Page 43
43
Dell M8428-K Hardware reference manual - Page 44
44
Dell M8428-K Hardware reference manual - Page 45
45
Dell M8428-K Hardware reference manual - Page 46
46
Dell M8428-K Hardware reference manual - Page 47
47
Dell M8428-K Hardware reference manual - Page 48
48
Dell M8428-K Hardware reference manual - Page 49
49
Dell M8428-K Hardware reference manual - Page 50
50
Dell M8428-K Hardware reference manual - Page 51
51
Dell M8428-K Hardware reference manual - Page 52
52
Dell M8428-K Hardware reference manual - Page 53
53
Dell M8428-K Hardware reference manual - Page 54
54
Dell M8428-k Hardware Reference Manual 19
53-1001980-01
Changing from full fabric mode to NPIV aggregator mode
2
Changing to NPIV mode using the browser-based GUI
Complete the following steps to enable NPIV mode using the browser-based GUI.
1. From the management console, open a Web browser.
2. Enter the IP address of the converged network switch into the Address field of the Web
browser.
3. Log into the browser-based GUI using the default administrative account.
Login: admin
Password: password
4. From the Fabric Tree, select the converged network switch.
The selected switch module appears in the Switch View.
5. Click the Switch Admin button in the browser-based GUI Manage task box.
The Switch Administration window opens.
NOTE
You should save the configuration file if you are converting an converged network switch to NPIV
mode. To save your current configuration, click the Show Advanced Mode button in the top
right-hand corner of the Switch Administration window. Select the Configure tab, then select the
Upload/Download tab. Enter the relevant information to upload the configuration file.
6. From the Switch Status section, click Disable.
7. From the NPIV Mode section, click Enable.
8. Click Apply.
9. When prompted, click Yes to restart the switch module in NPIV mode.
The current browser-based GUI session closes; relaunch browser-based GUI after the switch
module reboots.
Changing to NPIV mode using the command line interface
Complete the following steps to enable NPIV mode using the CLI.
1. Log in using the default administrative account.
Login: admin
Password: password
2. Enter the following command to disable full fabric mode.
switchDisable
3. Back up the switch configurations. See “Backing up the configuration” on page 20 for
specifics.
4. Enter the following command to enable NPIV mode:
ag ––modeEnable
The switch module automatically reboots and comes back online in NPIV mode using a factory
default F_Port to N_Port mapping.