504 Fabric OS Command Reference
53-1001764-02
lsDbShow
2
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command
Availability" for details.
Operands This command has the following operand:
domain Specifies the domain ID of the LSR to be displayed. This operand is optional;
if omitted, the entire link state database is displayed.
Examples To display the link state record for a switch:
switch:admin> lsdbshow 1
Domain = 1 (self), Link State Database Entry pointer = 0x1096da60
lsrP = 0x109784b0
earlyAccLSRs = 0
ignoredLSRs = 0
lastIgnored = Never
installTime = Aug 26 18:20:41.451
lseFlags = 0xa
uOutIfsP[0] = 0x00000000
uOutIfsP[1] = 0x00000000
uOutIfsP[2] = 0x00000000
uOutIfsP[3] = 0x00000000
uOutIfsP[4] = 0x00000000
uOutIfsP[5] = 0x00000000
uOutIfsP[6] = 0x00000000
uPathCost = 0
uOldHopCount = 0
uHopsFromRoot = 0
mOutIfsP[0] = 0x10000000
mOutIfsP[1] = 0x00000000
mOutIfsP[2] = 0x00000000
mOutIfsP[3] = 0x00000000
advertiser Domain ID of the switch that originated this LSR.
incarn Incarnation number of this LSR.
length Total length, in bytes, of this LSR. Includes header and link state
information for all links.
chksum Checksum of total LSR, with exception of lsAge field.
linkCnt Number of links in this LSR. Each link represents a neighbor in
NB_ST_FULL state.
flags Always 0.
LinkId ID of this link. It is the domain ID of the switch on the other side of the link.
out port Port number on the local switch.
rem port Port number of the port on the other side of the link.
cost Cost of this link. The default cost for a 1 Gbps link is 1,000.
costCnt Always 0.
type Always 1.
TABLE 24 lsDbShow display fields (Continued)
Field Description