128 Script Commands
• start secureErase (physicalDisk | physicalDisks)
• enable diskGroup [diskGroupName] security
Enclosure Loss Protection
For enclosure loss protection to work, each physical disk in a disk group must
be in a separate enclosure. If you set the enclosureLossProtect parameter to
true and have selected more than one physical disk from any one enclosure,
the storage array returns an error. If you set the enclosureLossProtect
parameter to false, the storage array performs operations, but the disk group
that you create might not have enclosure loss protection. Enclosure loss
protection is not valid when you create virtual disks on existing disk groups.
Create Host
This command creates a new host.If you do not specify a host group in which
to create the new host, the new host is created in the default group.
Syntax
create host userLabel=”hostName”
[hostGroup=(“hostGroupName” | defaultGroup)]
[hostType=(hostTypeIndexLabel |
hostTypeIndexNumber)]
Parameters
Parameter Description
userLabel The name that you want to give the host that you
are creating. Enclose the host name in double
quotation marks (“ ”).
hostGroup The name of the host group in which you want to
create a new host. Enclose the host group name in
double quotation marks (“ ”). (If a host group does
not exist, you can create a new host group by using
the
create hostGroup command.) The
defaultGroup option is the host group that contains
the host to which the virtual disk is mapped.
book.book Page 128 Friday, March 4, 2011 10:45 AM