Dell 4200 Installation Manual
Download Installation manual of Dell 4300 Computer Hardware, Desktop for Free or View it Online on All-Guides.com. This version of Dell 4300 Manual compatible with such list of devices, as: 4300, PowerEdge systems 6300, 4200, 5160, 4200W
Brand: Dell
Category: Computer Hardware , Desktop , Gateway , Laptop , Power Supply , Server , Storage , UPS
Type: Installation manual
Model: Dell 4300 , Dell PowerEdge systems 6300 , Dell 4200 , Dell 4400 , Dell 5160 , Dell 4200W
Pages: 28 (1.11 Mb)
1-6 Dell PowerEdge 4x00 and 6300 Systems Tower Installation Guide
Figure 1-4. Removing the 24-U Rack Doors
Removing the Cable Management Arm
To remove the cable management arm on the back of the system, perform these
steps:
1. Disconnect the power cable from the power distribution unit inside the rack or
from the AC power receptacle providing power to the system you are removing.
2. Disconnect the input/output (I/O) and power cables from the back of the system.
Identify the cables fastened to the cable management arm, and release the
Velcro strips securing the cables to the cable management arm.
3. From the back of the rack, remove the three 10-32 x 0.25-inch Phillips-head
screws securing the cable management arm to the cable tray on the back of the
system (see Figure 1-5).
4. Slide the system partially out of the rack and verify that the cable management
arm and all of the cables are removed.
5. Disconnect the right-angle bracket of the cable management arm from the
vertical rail on the back of the rack (see Figure 1-5).
Fold the cable management arm and place the arm, together with all attaching
hardware, in a container for future use.
hinge insert
hinge pin
hinge