Dell PowerEdge 2300 Upgrade Manual

Download Upgrade manual of Dell 4300 Computer Hardware, Desktop for Free or View it Online on All-Guides.com.

Brand: Dell

Category: Computer Hardware , Desktop , Projector , Server , Wireless Router

Type: Upgrade manual

Model: Dell 4300 , Dell 2300 , Dell PowerEdge 4350

Pages: 24 (1.14 Mb)

Download Dell 4300 Upgrade manual

Dell 4300 Upgrade manual - Page 1
1
Dell 4300 Upgrade manual - Page 2
2
Dell 4300 Upgrade manual - Page 3
3
Dell 4300 Upgrade manual - Page 4
4
Dell 4300 Upgrade manual - Page 5
5
Dell 4300 Upgrade manual - Page 6
6
Dell 4300 Upgrade manual - Page 7
7
Dell 4300 Upgrade manual - Page 8
8
Dell 4300 Upgrade manual - Page 9
9
Dell 4300 Upgrade manual - Page 10
10
Dell 4300 Upgrade manual - Page 11
11
Dell 4300 Upgrade manual - Page 12
12
Dell 4300 Upgrade manual - Page 13
13
Dell 4300 Upgrade manual - Page 14
14
Dell 4300 Upgrade manual - Page 15
15
Dell 4300 Upgrade manual - Page 16
16
Dell 4300 Upgrade manual - Page 17
17
Dell 4300 Upgrade manual - Page 18
18
Dell 4300 Upgrade manual - Page 19
19
Dell 4300 Upgrade manual - Page 20
20
Dell 4300 Upgrade manual - Page 21
21
Dell 4300 Upgrade manual - Page 22
22
Dell 4300 Upgrade manual - Page 23
23
Dell 4300 Upgrade manual - Page 24
24
1-12 Dell PowerEdge Systems Microprocessor Upgrade
2. Remove the microprocessors.
See Removing the Microprocessors, found later in this document.
3. Remove and replace the guide brackets.
See Removing and Replacing the Guide Brackets, found later in this
document.
4. Install the upgrade microprocessor.
See Installing the Upgrade Microprocessor, found later in this document.
5. Reassemble and check the system.
See Reassembling and Checking the System, found later in this document.
!"#
To remove the current microprocessors from the system board, perform the follow-
ing steps.
 74
6

 $7"
77
1. Unscrew and remove the two large thumbscrew retention pins that secure the
microprocessor to the system board.
2. Press the microprocessors release latches inward until they snap into position
(see Figure 1-4).
NOTE: Figure 1-4 illustrates the SEC cartridge. The heat sink on the single-edge
connector cartridge 2 (SECC2) package is different.
3. Grasp the microprocessor assembly firmly and pull it away from the microproces-
sor guide bracket assembly.
You must use up to 15 pounds (lb) of force to disengage the microprocessor
from the connector.