Dell PowerEdge 2300 Upgrade Manual

Download Upgrade manual of Dell 4300 Computer Hardware, Desktop for Free or View it Online on All-Guides.com.

Brand: Dell

Category: Computer Hardware , Desktop , Projector , Server , Wireless Router

Type: Upgrade manual

Model: Dell 4300 , Dell 2300 , Dell PowerEdge 4350

Pages: 24 (1.14 Mb)

Download Dell 4300 Upgrade manual

Dell 4300 Upgrade manual - Page 1
1
Dell 4300 Upgrade manual - Page 2
2
Dell 4300 Upgrade manual - Page 3
3
Dell 4300 Upgrade manual - Page 4
4
Dell 4300 Upgrade manual - Page 5
5
Dell 4300 Upgrade manual - Page 6
6
Dell 4300 Upgrade manual - Page 7
7
Dell 4300 Upgrade manual - Page 8
8
Dell 4300 Upgrade manual - Page 9
9
Dell 4300 Upgrade manual - Page 10
10
Dell 4300 Upgrade manual - Page 11
11
Dell 4300 Upgrade manual - Page 12
12
Dell 4300 Upgrade manual - Page 13
13
Dell 4300 Upgrade manual - Page 14
14
Dell 4300 Upgrade manual - Page 15
15
Dell 4300 Upgrade manual - Page 16
16
Dell 4300 Upgrade manual - Page 17
17
Dell 4300 Upgrade manual - Page 18
18
Dell 4300 Upgrade manual - Page 19
19
Dell 4300 Upgrade manual - Page 20
20
Dell 4300 Upgrade manual - Page 21
21
Dell 4300 Upgrade manual - Page 22
22
Dell 4300 Upgrade manual - Page 23
23
Dell 4300 Upgrade manual - Page 24
24
support.dell.com Dell PowerEdge Systems Microprocessor Upgrade 1-17
To install an upgrade microprocessor, perform the following steps:
1. Insert the new microprocessor into the system board connector (see
Figure 1-8).
2. Press the microprocessor firmly into its connector until it is fully seated and the
latches snap into place.
You must use up to 25 lb of force to fully seat the microprocessor.
For Pentium III microprocessors, you do not need to change the jumper settings
on the system board.
For Pentium II microprocessors, set the speed jumper to the speed of the
microprocessor.
Upgrade microprocessors have a heat sink with a notch for engaging a threaded
stud on the system board, as shown in Figure 1-8.
3. Repeat steps 1 and 2 for your second upgrade microprocessor or to install a
terminator card.
,' ! 
install this retention
pin after the cooling
shroud is installed
on PowerEdge 2300
systems only
threaded stud