Dell 5 series User's Manual
Download Operation & user’s manual of Dell 5 series Computer Hardware for Free or View it Online on All-Guides.com.
Brand: Dell
Category: Computer Hardware
Type: Operation & user’s manual for Dell 5 series
Pages: 112 (8.6 Mb)
38 Hardware Installation and Configuration
Disconnecting the BBU from a PERC 5/i Adapter or a PERC 5/i
NOTE: A PERC 5/i Adapter installed in a Dell Precision workstation or a PowerEdge SC server does not have a BBU.
This section describes how to disconnect the BBU on a PERC 5/i Adapter or a PERC 5/i while the
adapter or controller is installed in a system.
1
Perform a controlled shutdown on the system in which the PERC 5/i is installed.
2
Disconnect the system from the electrical outlet and remove the system cover.
CAUTION: Running a system without the system cover installed can cause damage due to improper cooling.
NOTE: For more information on removing and replacing the system cover, see the Hardware Owner’s Manual
that shipped with the system.
3
Determine whether the dirty cache LED on the controller is illuminated.
• If the LED is illuminated, replace the system cover, reconnect the system to power, turn on the
system, and repeat step 1 and step 2. See Figure 3-10.
NOTE: The location of the PERC 5/i varies from system to system. See the Hardware Owner’s Manual
that shipped with the system for specific information on where the PERC 5/i is located.
• If the LED is not illuminated, continue with the next step.
4
Locate the battery cable connection next to the DIMM on the controller, and disconnect the battery.
Dell_PERC5_UG.book Page 38 Tuesday, February 13, 2007 6:02 PM