Dell PowerEdge M420 Hardware Reference Manual
Download Hardware reference manual of Dell PowerEdge M420 Computer Hardware, Desktop for Free or View it Online on All-Guides.com.
Brand: Dell
Category: Computer Hardware , Desktop , Network Card , Network Hardware , Network Storage Server , Server , Switch
Type: Hardware reference manual
Model: Dell PowerEdge M420 , Dell PowerEdge M520 , Dell PowerEdge M620
Pages: 48 (2.67 Mb)
4 M5424 SAN I/O Module Hardware Reference Manual
53-1001082-01
Hardware Description
1
Hardware Description
This section describes the physical SAN I/O Module as shipped from the factory. For specifications,
such as installed memory, weight and physical dimensions, facility requirements, architectural
specifications, and regulatory compliance, refer to
Appendix A, “SAN I/O Module specifications”
Port side
Externally accessible ports and LEDs are on the port side of the SAN I/O Module. The port side
faces out when the SAN I/O Module is inserted into the I/O bay of the Blade Server enclosure.
Figure 1 details the port side. For a complete description of the locations and interpretations of
these LEDs, see “Interpreting LED activity” on page 22.
Access the I/O module handle at the front of the port side of the SAN I/O Module. By lifting the
handle’s release latch, you can open the handle to remove and insert the unit from the Blade
Server Enclosure.
FIGURE 1 Port side view
1. Ports with port status and port speed LEDs
2. RJ45 console port
3. SAN I/O Module status LED
4. Power status LED
5. Server management LED
6. SAN I/O Module handle
The nonport (SAN I/O Module status) LEDs, shown as item 3 of Figure 1, display SAN I/O
Module-level information as shown in Figure 2.
FIGURE 2 Other status LEDs
1 2
3 4
5
6
1 2
3 4
5
6
1 2
3