Dell PowerConnect 3324 User's manual
Download Operation & user’s manual of Dell 3348 - PowerConnect Switch - Stackable Desktop, Switch for Free or View it Online on All-Guides.com.
Brand: Dell
Type: Operation & user’s manual
Model: Dell 3348 - PowerConnect Switch - Stackable , Dell PowerConnect 3324
Pages: 278 (15.43 Mb)
Download Dell 3348 - PowerConnect Switch - Stackable Operation & user’s manual
Interface Settings Page
The QoS Interface Settings page contains the following fields:
l Interface—Indicates the specific interface to which the Trust mode is applied. The trust mode is applied to:
¡ Port—Indicates the port number.
¡ LAG—Indicates the LAG number.
¡ VLAN—Indicates the VLAN number.
l Disable "Trust" Mode on Interface—Disables Trust values on the device. For more information about Trust settings, see "Configuring Global QoS
Settings".
l Set Default CoS For Incoming Traffic To—Sets the default CoS tag value untagged packets. The CoS tag values are 0-7. The default value is 0.
Assigning QoS/CoS settings for an interface:
1. Open the QoS Interface Settings page.
2. Select an interface in the Interface field.
3. If trust mode is to be disabled on the specific interface, check the Disable "Trust" Mode on Interface check box.
4. Set Default CoS For Incoming Traffic to the required value.
5. Click Apply Changes. The QoS/CoS settings are assigned to the interface.
Assigning QoS/CoS Interfaces Using the CLI Commands
The following table summarizes the equivalent CLI commands for configuring fields in the QoS Interface Settings page.
CLI Command
Description
qos trust
Enables trust state for each.