Dell PowerConnect 3324 User's manual
Download Operation & user’s manual of Dell 3348 - PowerConnect Switch - Stackable Desktop, Switch for Free or View it Online on All-Guides.com.
Brand: Dell
Type: Operation & user’s manual
Model: Dell 3348 - PowerConnect Switch - Stackable , Dell PowerConnect 3324
Pages: 278 (15.43 Mb)
Download Dell 3348 - PowerConnect Switch - Stackable Operation & user’s manual
All the RX/TX packets should be monitored to the same port.
To open the Port Mirroring page:
l Click Switch > Ports > Port Mirroring in the Tree View. The Port Mirroring page opens.
Port Mirroring Page
l Destination Port—Defines the port number to which port traffic is mirrored. A copy port cannot mirror itself, cannot be a VLAN member other than the
source port VLAN, and cannot be configured with an IP interface. All traffic on the source port is tagged.
l Source Port—Defines the port number from which port traffic is copied. A maximum of 8 ports can be mirrored to one mirroring port.
l Type—Specifies the port traffic type that is mirrored. The possible field values are:
¡ RX—Indicates that incoming traffic is mirrored.
¡ TX—Indicates that outgoing traffic is mirrored.
¡ Both—Indicates that both incoming and outgoing traffic is mirrored.
l Status—Indicates the port state. The possible field values are:
¡ Active—Indicates the port is enabled, and receiving/ forwarding network traffic.
¡ Not Active—Indicates that the port is disabled, and is not receiving/forwarding network traffic.
l Remove—Removes the port mirroring session. The possible field values are:
¡ Checked—Removes the port mirroring session.
¡ Unchecked—Maintains the port mirroring session.
Adding a port mirroring session:
1. Open the Port Mirroring page.
2. Click Add. The Add Source Port page opens.
NOTE: When a port is set to be a target port for a port-mirroring session, all normal operations on this port are suspended. These operations include
Spanning Tree and LACP.