Dell OptiPlex Gs Reference
Download Reference and installation manual of Dell OptiPlex Gs Desktop for Free or View it Online on All-Guides.com.
Brand: Dell
Category: Desktop
Type: Reference and installation manual for Dell OptiPlex Gs
Pages: 121 (4.17 Mb)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
ISA Configuration Utility Messages A-9
WARNING: Could not
configure
Plug and
Play Card Name
.
WARNING: Could not
configure PCI device,
ID=
DeviceID
.
Failed to configure
Number
of
Total Count
Plug and Play ISA
devices. Use your sys-
tem’s configuration
utility to resolve
conflicts. Press any
key to continue.
The card(s) mentioned are
not fully configured due to
resource conflicts.
If you do not know the allowable resource values
for your Plug and Play or PCI expansion card, use
the following procedure to locate and resolve the
resource conflict:
1. Remove all card configurations from the
ICU.
See “Removing a Card” in Chapter 3 for
instructions.
2. Reboot your system.
The ICU should automatically configure your
Plug and Play or PCI expansion card.
3. Add the ISA expansion cards back into the
ICU, resolving any resource conflicts as
they arise.
See “Adding a Listed Card” in Chapter 3 for
instructions.
If your Plug and Play or PCI expansion card is not
automatically configured when you reboot the
system with all other cards removed, you should
contact the manufacturer of the card or see the
chapter titled “Getting Help” in your Diagnostics
and Troubleshooting Guide.
WARNING: Boot Device
conflict detected!
CSN=
Card Select Number
Error=
Error
.
One of the devices is
attempting to use one or
more resources assigned to
the system’s boot device.
Perform the following procedure:
1. Start the ICU.
2. Identify the card marked
config err
.
This should be the card that is attempting to
use one or more resources required by the
system’s boot device.
3. Go to the procedure for the preceding
error message in this table.
Table A-2. Configuration Manager Messages
(Continued)
Message Probable Cause Corrective Action
NOTE: For the full name of an abbreviation or acronym used in this table, see the Glossary in your online System User’s Guide.
93816BK0.BK : 93816aa0.frm Page 9 Monday, September 16, 1996 1:21 PM