Dell OptiPlex Gs Reference
Download Reference and installation manual of Dell OptiPlex Gs Desktop for Free or View it Online on All-Guides.com.
Brand: Dell
Category: Desktop
Type: Reference and installation manual for Dell OptiPlex Gs
Pages: 121 (4.17 Mb)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
4-2 Dell OptiPlex Gs and Gs+ Low-Profile Systems Reference and Installation Guide
Figure 4-1. I/O Ports and Connectors
C
onfiguring the NIC
You use the 3Com Install program to configure the
system’s built-in Ethernet NIC. If your system has Dell-
installed MS-DOS, the 3Com files are located in the
c:\dell\3com directory. A diskette image of the 3Com
files can be used to make a backup diskette.
If your system does not have Dell-installed MS-DOS,
you should have received a 3Com diskette with your sys-
tem. To run the program from a diskette, substitute
a:\
for
c:\dell\3com
in the instructions that follow.
To run the Install program, follow these steps:
1. Boot the system to MS-DOS.
For instructions, see your MS-DOS documentation.
2. Change to the c:\dell\3com directory.
For example, type
cd c:\dell\3com
.
3. Type
install
and press <
ENTER
>.
The first time you run the Install program, a license
agreement screen appears. To accept the terms and
conditions of the license agreement, type
y
and press
<
ENTER
>. The Install information screen is then
displayed.
4. Read the Install information screen and press
<
ENTER
>.
The Main Menu of the Install program appears.
5. Proceed to “Using Install in a Novell NetWare
Environment” or “Using Install in a Non-
NetWare Environment” found next in this
chapter.
Using Install in a Novell
®
NetWare
®
Environment
To use the Install program to configure a single NIC on
an MS-DOS client workstation in a NetWare environ-
ment, follow these steps:
1. Connect the workstation to a NetWare network.
For instructions on connecting the workstation to a
network, see “Connecting to a Network” found ear-
lier in this chapter.
2. Complete steps 1 through 4 in “Configuring the
NIC” found earlier in this section.
3. When the Main Menu is displayed, select
NET-
WARE DOS ODI CLIENT
and press <
ENTER
>.
The Install program then automatically configures
the NIC and installs the required software drivers.
Several messages appear during the installation
keyboard
connector
mouse
connector
serial port 1
connector
serial port 2
connector
parallel port
connector
optional NIC
connector
video connector
link integrity indicator
activity indicator
93816BK0.BK : 93816c40.frm Page 2 Monday, September 16, 1996 1:21 PM