Dell OptiPlex Gs Reference
Download Reference and installation manual of Dell OptiPlex Gs Desktop for Free or View it Online on All-Guides.com.
Brand: Dell
Category: Desktop
Type: Reference and installation manual for Dell OptiPlex Gs
Pages: 121 (4.17 Mb)
Using the Network Interface Controller 4-7
If a diagnostic test has failed, follow these steps to test the
NIC further:
1. Inspect all cables and connections.
2. Make sure that you booted your system to
MS-DOS version 3.1 or later and that no device
drivers or memory managers are loaded.
3. If you are running the Group 3 test, make sure
the NIC is connected to a properly cabled and
inactive network and that an echo server is set up
on the network.
4. Make sure the settings for the NIC’s options are
not the same settings being used by any other
adapter cards installed in the computer.
5. If you experience problems that occur only when
using the
NETWARE DOS ODI CLIENT option (des-
cribed in step 3 of “Using Install in a Novell
NetWare Environment” found earlier in this
chapter), display or print the
autolink.log
file
located in the root directory of drive C.
The
autolink.log
file contains a log of all events that
occurred during the automatic installation and configura-
tion process. To display this file, at the MS-DOS prompt
type the following command line and press <
ENTER
>:
type c:\autolink.log | more
93816BK0.BK : 93816c40.frm Page 7 Monday, September 16, 1996 1:21 PM