Dell PowerConnect M6348 Configuration Manual
Download Configuration manual of Dell PowerEdge M520 Computer Hardware, Desktop for Free or View it Online on All-Guides.com.
Brand: Dell
Category: Computer Hardware , Desktop , Network Hardware , Network Router , Server , Switch
Type: Configuration manual
Model: Dell PowerEdge M520 , Dell PowerEdge M820 Systems , Dell PowerConnect M6348
Pages: 158 (1.54 Mb)
72 Routing Configuration
Assign virtual router IDs to the port that will participate in the protocol:
console(config)#interface vlan 50
console(config-if-vlan50)#ip vrrp 20
Specify the IP address that the virtual router function will recognize. The priority default is 255.
console(config-if-vlan50)#ip vrrp 20 ip 192.150.2.1
Enable VRRP on the port:
console(config-if-vlan50)#ip vrrp 20 mode
console(config-if-vlan50)#exit
Example 2: Configuring VRRP on the Switch as a Backup Router
Enable routing for the switch. IP forwarding is then enabled by default.
console#config
console(config)#ip routing
Configure the IP addresses and subnet masks for the port that will participate in the protocol:
console(config)#interface vlan 60
console(config-if-vlan60)#routing
console(config-if-vlan60)#ip address 192.150.4.1 255.255.255.0
console(config-if-vlan60)#exit
Enable VRRP for the switch:
console#config
console(config)#ip vrrp
Assign virtual router IDs to the port that will participate in the protocol:
console(config)#interface vlan 60
console(config-if-vlan60)#ip vrrp 20
Specify the IP address that the virtual router function will recognize.
console(config-if-vlan60)#ip vrrp 20 ip 192.150.2.1
Set the priority for the port. The default priority is 100.
console(config-if-vlan60)#ip vrrp 20 priority 254