• Home
• Brands
• Dell Manuals
• Dell PowerVault MD3060e
• Dell PowerVault MD3260 Setting Up

Dell PowerVault MD3260 Setting Up

Download Setting up of Dell PowerVault MD3060e Desktop, Enclosure for Free or View it Online on All-Guides.com. This version of Dell PowerVault MD3060e Manual compatible with such list of devices, as: PowerVault MD3060e, PowerVault MD3260, PowerVault MD3260i, PowerVault MD3660f, PowerVault MD3660i Series Storage Array

1

2

Setting Up Your Dell PowerVault MD3260/3260i/3660i/3660f/3060e Storage Array

(continued...)

The MD Series Dense enclosure supports a number of non-redundant (single path) or

redundant (dual path) confi gurations, depending on your storage array model.

For SAS and iSCSI storage arrays, see the corresponding Deployment Guides.

For Fibre Channel storage arrays, see

Confi guring Fibre Channel With Dell

MD3600f/3620f/MD3660f Series Storage Arrays

.

The following sample confi gurations illustrate basic host server to storage array cabling

concepts. Port availability depends on your MD Series model.

Direct-Attached, Non-Redundant Cabling

SAN-Attached, Redundant Cabling

to Host Server 2

to Host Server 4

Ethernet

Management

Port

to Management

Station (MD Storage

Manager)

to Host Server 3

to Host Server 1

to Host Server(s)

to Host Server(s)

Optional SAN switches

Ethernet

Management

Port

Ethernet

Management

Port

to Management

Station (MD Storage

Manager)

Using the Automatic Confi guration Wizard

The Automatic Confi guration Wizard allows you to create multiple disk groups, disk

pools, virtual disks, and hot spare physical disks with the same attributes.

To start the wizard, select Storage Array → Confi guration → Automatic → Disk Pools

or Disk Groups.

Manually Confi guring Storage Space

To manually confi gure your storage, select Storage → Virtual Disk → Create.

© 2012 Dell Inc. All rights reserved.

Dell™, the DELL

logo, and PowerVault™ are trademarks of Dell Inc.

Printed in the U.S.A.

2012 - 07

SAN-Attached Confi guration

A supported switch zoning topology is required to deploy the MD3660f Fibre Channel

storage array. See

Confi guring Fibre Channel With Dell MD3600f/3620f/MD3660f Series

Storage Arrays

at support.dell.com/manuals.

For highest throughput, all network components (switch, router, host NIC or cable

connection) must support the highest storage array data speed.

For example, connecting a 10 Gbps iSCSI storage array to a host server using a 1 Gbps

network switch will reduce overall throughput.

Cabling Guidelines

Always cable your storage array in a powered-down state.•

For Fibre Channel storage arrays, always use a Dell-supported Small •

Form-factor Pluggable (SFP) transceiver (see the Dell PowerVault Support Matrix

at support.dell.com).

Make sure you understand data availability and failover requirements for your

•

confi guration before cabling the storage array.

Only use Dell MD 3060e expansion enclosure to expand the capacity of your

•

storage array.

Cabling Your MD3060e Expansion Enclosure

To add capacity to your Dense storage array, you can daisy chain up to two 4U enclo-

sures with SAS-based MD3060e EMMs installed in place of the RAID controller modules.

This confi guration off ers a maximum of 180 physical disks in your storage array with

Premium Feature activation.

To connect the MD3060e-based expansion enclosure to your MD Series Dense

storage array:

1. Connect a supported SAS cable to the SAS OUT port on the MD Series Dense storage

array.

2. Connect the other end of the SAS cable to SAS port 1 on the MD3060e

EMM as shown in the following fi gure.

3. To add a second MD3060e expansion enclosure, daisy chain it to the fi rst expansion

enclosure as shown in the diagram.

CAUTION: Do not connect to SAS port 2 on the EMM.

CAUTION: Like the RAID storage arrays, physical-disk slots 0, 3, 6, and 9 must be

populated fi rst.

CAUTION: The expansion enclosure must be direct-attached. Do not connect the

MD3060e expansion enclosure to the MD Series Dense RAID storage array using a

SAN connection.

NOTE: A maximum of two expansion enclosures are supported.

The Dell PowerVault MD Series Resource DVD contains software and drivers

for both Linux and Microsoft Windows operating systems. The DVD also contains MD

Storage Manager, a graphically based utility, which is used to confi gure, manage, and

monitor the storage array and expansion enclosures.

NOTE: If you are confi guring an iSCSI storage array, use the MD Confi guration Utility

(MDCU) to set up iSCSI host ports and create iSCSI sessions. If you select the iSCSI

management option from the Resource DVD, the MDCU is automatically launched when

you start MD Storage Manager.

To install MD Storage Manager:

1. Insert the PowerVault MD Series Resource DVD.

2. If the installer does not launch automatically, go to the root directory on the DVD (or

downloaded installer ISO) and double-click md_launcher.exe (Windows) or use auto

run (Linux).

3. Select Install MD Storage Software.

The installation wizard allows you to choose Management Station or Host Installation.

You can choose both. You must, however, install the host-based storage agent and

multipath drivers on each host server accessing the storage array.

Review the Readme File

A readme.txt fi le is included in the Resource DVD root directory. It contains the latest

updates, fi xes, and other information applicable to your storage array.

To discover your storage array, you must be connected to the Ethernet management

port (either on the same subnet or through a confi gured network switch) on your RAID

controller module. To run management operations, you must be connected to both

RAID controller modules through a fully confi gured Ethernet management port.

NOTE: For best throughput, it is recommended that you use out-of-band management.

Starting MD Storage Manager

To launch MD Storage Manager:

Select Start → Programs → Dell → MD Storage Manager.

The Enterprise Management Window (EMW) displays host servers and storage arrays

automatically discovered on your local subnet.

Discovering Your Storage Array

1. In the EMW, click Setup.

2. Select Add Storage Array.

3. Choose either Automatic or Manual discovery.

NOTE: Automatic discovery discovers all storage arrays in your local subnet.

Manual discovery prompts you to add storage arrays by IP address or network name.

4. Click OK.

5. Double-click the discovered storage array.

The Array Management Window is displayed.

WARNING: Do not plug the enclosure into a standard power outlet.

Your storage array is shipped with two IEC C19 to C20 jumper cords. Plug the

C19 plug into the array’s power supplies and the C20 plug into the power

distribution unit (PDU) in the rack cabinet. For power redundancy, split the

power connections from each enclosure into separate PDUs and connect

the PDUs to external power receptacles on diff erent circuits. The enclosure

accepts only 200 V to 240 V input sources.

Follow these steps to power on your storage array:

1. Turn on any network switches, routers, or other standalone components.

2. Power on the MD3060e expansion enclosures, if applicable.

NOTE: Wait for the enclosure status LED to turn blue before proceeding to the

next step.

3. Power on the MD Series Dense storage array.

NOTE: Wait for the storage array status LED to turn blue before attempting to discover

or manage the array.

Cabling Your Storage Array and Expansion Enclosure

Ethernet

Management

Port

Discovering and Managing Your Storage Array

Installing MD Storage ManagerPowering on the Storage Array

0JPG9TA00

MD Series Dense Storage Enclosure

MD3060e Expansion Enclosure

MD3060e Expansion Enclosure