Dell PowerVault MD3620f Command Line Interface Manual
Download Command line interface manual of Dell PowerVault MD3600f Desktop, Disk array system for Free or View it Online on All-Guides.com.
Brand: Dell
Category: Desktop , Disk array system , Software , Storage
Type: Command line interface manual
Model: Dell PowerVault MD3600f , Dell PowerVault MD3620f
Pages: 328 (6.84 Mb)
Download Dell PowerVault MD3600f Command line interface manual
178 Script Commands
Parameters
Parameter Description
sourceVirtualDisk Name of the source virtual disk from
which to take a snapshot. You must put
quotation marks (" ") around the source
virtual disk name.
repositoryRAIDLevel RAID level for the repository virtual disk.
Valid values are 0, 1, 5, or 6.
repositoryPhysicalDisks Specifies the physical disks to assign to
the repository. Specify the enclosure ID
and slot ID for each physical disk assigned
to the virtual disk. Enclosure ID values
are 0 to 99. Slot ID values are 0 to 31. You
must put parentheses around the list of
repository physical disks.
repositoryDriveCount Number of unassigned physical disks to
use for the repository virtual disk.
repositoryDiskGroupUserLabel Use this parameter when you create a new
disk group.
The name of a new disk group to be used
for the repository virtual disk. Enclose the
repository disk group name in double
quotation marks (“ ”).
repositoryDiskGroup Sequence number of the disk group where
the repository virtual disk is located.
userLabel The name to give the snapshot virtual
disk. You must put quotation marks (" ")
around the snapshot virtual disk name.
enclosureLossProtect Specifies that enclosure loss protection is
enforced when creating the repository. To
enforce enclosure loss protection, set this
parameter to TRUE. The default setting
is FALSE. For information about the
enclosureLossProtect parameter, see
"Enclosure Loss Protection" on page 54.
book.book Page 178 Wednesday, June 8, 2011 12:20 PM