Dell PowerVault MD3620f Command Line Interface Manual
Download Command line interface manual of Dell PowerVault MD3600f Desktop, Disk array system for Free or View it Online on All-Guides.com.
Brand: Dell
Category: Desktop , Disk array system , Software , Storage
Type: Command line interface manual
Model: Dell PowerVault MD3600f , Dell PowerVault MD3620f
Pages: 328 (6.84 Mb)
Download Dell PowerVault MD3600f Command line interface manual
Script Commands 251
NOTE: When you use this command, you can specify one or more of the optional
parameters. You can use any combination of alphanumeric characters, hyphens,
and underscores for the names. Names can have a maximum of 30 characters.
NOTE: You can set the warningThresholdPercent parameter and the
repositoryFullPolicy parameter for both the snapshot repository virtual disk or the
snapshot virtual disk.
Set Storage Array
This command defines the properties of the storage array.
Syntax
set storageArray (alarm=(enable | disable | mute)
|
autoSupportConfig (enable | disable) |
cacheBlockSize=cacheBlockSizeValue |
cacheFlushStart=cacheFlushStartSize |
cacheFlushStop=cacheFlushStopSize |
defaultHostType=(“hostTypeName” |
hostTypeIdentifier)
failoverAlertDelay=delayValue |
mediaScanRate=(disabled | 1-30) |
password=”password” |
userLabel=”storageArrayName”)
isnsRegistration=(TRUE | FALSE)
warningThresholdPerce
nt
The percentage of repository capacity at which
you receive a warning that the snapshot
repository is nearing full. Use integer values. For
example, a value of 70 means 70 percent. The
default value is 50.
repositoryFullPolicy How you want snapshot processing to continue if
the snapshot repository virtual disk is full. You
can choose to fail writes to the source virtual disk
(failSourceWrites) or fail writes to the snapshot
virtual disk (failSnapshot). The default value is
failSnapshot.
Parameter Description
book.book Page 251 Wednesday, June 8, 2011 12:20 PM