Dell External OEMR 1435 User's Manual
Download Operation & user’s manual of Dell Studio 1435 Desktop, Laptop for Free or View it Online on All-Guides.com.
Serial Port Console Redirection 125
Serial Port Console Redirection
Serial Communication
For PowerEdge x9xx and xx0x servers, serial console redirection can be
accomplished using COM1 or COM2.
Console Redirection Via COM1
To activate serial console redirection via COM1, you must configure the
following settings:
Set Serial Communication-> Serial Communication to On with Console
Redirection via COM1
Set Serial Communication-> External Serial Connector to COM1
Console Redirection Via COM2
Console Redirection via COM2 can be used to redirect either to the external
connector or to the remote access device, such as a BMC or DRAC 5, for
Serial Over LAN (SOL) communication.
To activate serial console redirection via COM2, you must configure the
following settings:
Set Serial Communication-> Serial Communication to On with Console
Redirection via COM2
Set Serial Communication-> External Serial Connector to COM2
NOTE: If the console redirection is used for SOL then the External Serial Connector
setting does not need to be configured.
When using COM2 for console redirection regardless of whether you redirect to
the external connector or for SOL, the BIOS reads the SOL baud rate from the
BMC and uses that setting to activate console redirection. SOL baud rate can
be configured using the Dell Deployment Toolkit, OMSA, DRAC, or the BMU.