Dell External OEMR 1435 User's Manual
Download Operation & user’s manual of Dell Studio 1435 Desktop, Laptop for Free or View it Online on All-Guides.com.
28 Configuring Your Managed System
Off:
COM1 and COM2 are both disabled and not available for use by the
operating system or applications. BIOS Console redirection is disabled.
NOTE: Select On with Console Redirection via COM2 to use Console
Redirection with SOL.
6
Use the up- and down-arrow keys to navigate to the
External Serial
Communication
field and press <Enter>.
7
Use the spacebar to select the appropriate external serial communication
option.
The available options are
COM1
,
COM2
, and
Remote Access.
The default option is
COM1
.
NOTE: Select Remote Access to access the BMC through the serial cable
connection. This option can be set to any value for using SOL and accessing
the BMC over LAN.
8
Press <Enter> to select.
9
If required, use the spacebar to navigate to and change the settings for
Redirection after Boot.
10
Use the up- and down-arrow keys to navigate to the
Failsafe Baud Rate
option and then use the space bar to set the console failsafe baud rate,
if applicable.
11
Use the up- and down-arrow keys navigate to the
Remote Terminal Type
option and then use the space bar to select either
VT 100/VT 200
or
ANSI,
if applicable.
12
Press <Enter> to return to the
System Setup
screen.
13
Press <Esc> to exit the System Setup program. The
Exit
screen displays
the following options:
•
Save Changes and Exit
•
Discard Changes and Exit
•
Return to Setup
NOTE: For most options, any changes that you make are recorded but do not take
effect until you restart the system.
NOTE: Press <F1> to display the help file for the System Setup program.