Dell PowerVault MD3000i Command Line Interface Manual
Download Cli manual of Dell PowerVault MD3000i Enclosure, Network Storage Server for Free or View it Online on All-Guides.com.
Brand: Dell
Category: Enclosure , Network Storage Server , Software , Speaker System , Storage
Type: Cli manual for Dell PowerVault MD3000i
Pages: 236 (1.13 Mb)
Script Commands 123
Parameters
NOTE: Challenge Handshake Authentication Protocol (CHAP) is a protocol that
authenticates the peer of a connection. CHAP is based upon the peers sharing a
“secret.” A secret is a security key that is similar to a password. Use
chapSecret only for initiators requiring mutual authentication.
Create RAID Virtual Disk (Automatic Physical Disk Select)
This command creates a disk group across the storage array physical disks,
and a new virtual disk in the disk group. The RAID controller modules in the
storage array choose the physical disks to include in the virtual disk.
Syntax
create virtualDisk physicalDiskCount=
numberOfPhysicalDisks
raidLevel=0 | 1 | 5 userLabel="
virtualDiskName
"
[physicalDiskType=(SAS | SATA) capacity=
virtualdiskCapacity
owner=(0 | 1) segmentSize=
segmentSizeValue
enclosureLossProtect=(TRUE |
FALSE)]
Parameter Description
iscsiName The default identifier of the iSCSI initiator.
userLabel The name that you want to use for the iSCSI initiator. Enclose
the name in double quotation marks (“ ”).
host The name of the host in which the iSCSI initiator is installed.
chapSecret The password that you want to use to authenticate a peer
connection.