Dell PowerVault MD3000i Command Line Interface Manual
Download Cli manual of Dell PowerVault MD3000i Enclosure, Network Storage Server for Free or View it Online on All-Guides.com.
Brand: Dell
Category: Enclosure , Network Storage Server , Software , Speaker System , Storage
Type: Cli manual for Dell PowerVault MD3000i
Pages: 236 (1.13 Mb)
Script Commands 169
Examples
-c "set controller [0] iscsiHostPort[0]
IPV6LocalAddress=
FE80:0000:0000:0000:0214:22FF:FEFF:EFA9 enableIPV6=
TRUE;"
-c "set controller [0] iscsiHostPort[0]
IPV6ConfigurationMethod=auto enableIPV6=TRUE;"
-c "set controller [0] availability=online;"
-c "set controller [0] ethernetPort[1]
IPV4Address=192.168.0.101;"
-c "set controller [0] iscsiHostPort[1]
IPV4SubnetMask=255.255.255.0 enableIPV4;"
-c "set controller [0] iscsiHostPort[1]
IPV4GatewayIP=192.168.0.1 enableIPV4;"
Set Disk Group
This command defines the properties for a disk group.
Syntax
set diskGroup [
diskGroupNumber
] addPhysicalDisks=
(
enclosureID0,slotID0 ... enclosureIDn,slotIDn
)
raidLevel=(0 | 1 | 5)
owner=(0 | 1)
availability=(online | offline)
Parameters
Parameter Description
diskGroup Sequence number of the disk group for which to set properties.
You must put brackets ([ ]) around the disk group number.
addPhysicalDisks Identifies the physical disk by enclosure and slot location to
include in the disk group. Enclosure ID values are 0 to 99. Slot ID
values are 0 to 31. You must put parentheses around the enclosure
ID values and the slot ID values.
raidLevel RAID level for the disk group. Valid values are 0, 1, or 5.