Dell 2970 Hardware Manual
Download Hardware owner's manual of Dell 2970 Server for Free or View it Online on All-Guides.com.
About Your System 21
E1211 ROMB Batt RAID battery is either missing,
bad, or unable to recharge due to
thermal issues.
Reseat the RAID battery
connector. See "RAID Battery" on
page 69, and "Troubleshooting
System Cooling Problems" on
page 123.
E1214
E1216
E1217
##
PwrGd Specified voltage regulator has
failed.
See "Getting Help" on page 147.
E1218 PCI Rsr 5V PwrGd The 5V voltage regulator on the
PCI riser has failed.
See "Getting Help" on page 147.
E1226 PCI Rsr 1.5V
PwrGd
The 1.5V voltage regulator on the
PCI riser has failed.
See "Getting Help" on page 147.
E1227 Linear PwrGd Linear voltage regulator(s) has
failed. Represents status of
multiple voltage regulators used
in the video and LOM circuitry.
See "Getting Help" on page 147.
E1229 CPU # VCORE Processor # VCORE voltage
regulator has failed.
See "Getting Help" on page 147.
E122A CPU VTT PwrGd Processor # VTT voltage has
exceeded the allowable voltage
range
See "Getting Help" on page 147.
E122D CPU # VDDIO
1.0V PwrGd
Processor # VDDIO voltage has
exceeded the allowable voltage
range
See "Getting Help" on page 147.
E122E CPU # VDDA Processor # VDDA voltage has
exceeded the allowable voltage
range
See "Getting Help" on page 147.
E122F 2.5V PwrGd 2.5V voltage regulator has failed. See "Getting Help" on page 147.
E1231 1.2V HTCORE
PwrGd
1.2V HTCORE voltage regulator
has failed.
See "Getting Help" on page 147.
E1232 GC Fatal1 PwrGd
GC Alert1 PwrGd
VLDT voltage regulator has
failed.
If removed, reinsert the power
supply into the bay and reconnect
to power. For component failures,
see "Getting Help" on page 147.
VDD 12V PS#
PwrGd
The specified power supply has
failed or has been removed from
the bay while the system was on.
E1310 RPM Fan ## RPM of specified cooling fan is
out of acceptable operating range.
See "Troubleshooting System
Cooling Problems" on page 123.
Table 1-6. LCD Status Messages (continued)
Code Text Causes Corrective Actions