Dell S6000 Test Report

Download Test report of Dell Networking S6000 System Network Hardware, Switch for Free or View it Online on All-Guides.com.

Dell Networking S6000 System Test report - Page 1
1
Dell Networking S6000 System Test report - Page 2
2
Dell Networking S6000 System Test report - Page 3
3
Dell Networking S6000 System Test report - Page 4
4
Dell Networking S6000 System Test report - Page 5
5
Dell Networking S6000 System Test report - Page 6
6
Dell Networking S6000 System Test report - Page 7
7
Dell Networking S6000 System Test report - Page 8
8
Dell Networking S6000 System Test report - Page 9
9
Dell Networking S6000 System Test report - Page 10
10
Dell Networking S6000 System Test report - Page 11
11
Dell Networking S6000 System Test report - Page 12
12
Dell Networking S6000 System Test report - Page 13
13
Dell Networking S6000 System Test report - Page 14
14
Dell Networking S6000 System Test report - Page 15
15
Dell Networking S6000 System Test report - Page 16
16
Dell Networking S6000 System Test report - Page 17
17
Dell Networking S6000 System Test report - Page 18
18
Dell Networking S6000 System Test report - Page 19
19
Dell Networking S6000 Switch DR130815
Copyright 2013 Miercom Page 17 23August2013
Testing was repeated and verified with the line rate emulation of the previously captured and
recorded QoE transaction traffic.
Using seven of the 10 GbE ports, the capacity of the S6000 was verified to be 63.2 Gbps of fully
meshed traffic at 99.5% line rate with low latency. The distribution of frame sizes was similar to
that in QoE testing. There was no frame loss and no network anomalies. See the table below.
The near-theoretical maximum of traffic throughput for these seven ports was achieved, far
exceeding the amount needed to support a 10,000-user VDI environment. The slight difference
from 100% line rate is attributable to the inter-frame gap (IFG) for the custom IMIX traffic
distribution used in testing.
Table 1: Throughput of Seven 10 GbE Ports, Fully Meshed Traffic with Similar
Frame Sizes in Scalability Testing
Tested Ports Traffic type Line rate (%)
Throughput
(Gbps)
7 x10Gbps Fully Meshed 99.5 63.20
The size of the ARP and MAC tables in the S6000 are crucial to its ability to scale to 10,000
users in a VDI environment.
In testing, the capacity of the ARP table was verified to be 52,251. This was more than double
the target capacity for verifying the ability of the S6000 to support 10,000 users in a VDI
environment, 20,000.
Also, the capacity of the MAC table was verified in testing to be 163,836. The target capacity was
160,000. The S6000 learned all of the MAC addresses in less than 15 seconds.
Based on the target capacity of the MAC address table, Miercom projects the S6000 can support
in a VDI environment eight times more than the 10,000 users validated with emulated traffic.
Table 2: Address Tables Verification
Table Target Capacity Verified Capacity
MAC Address 160,000 163.836
ARP Address 20,000 52,251
