Dell Metered Rack Power Distribution Unit User's Manual
Download Operation & user’s manual of Dell Metered Rack Power Distribution Unit Power distribution unit for Free or View it Online on All-Guides.com.
Brand: Dell
Category: Power distribution unit
Type: Operation & user’s manual for Dell Metered Rack Power Distribution Unit
Pages: 90 (1.09 Mb)
Download Dell Metered Rack Power Distribution Unit Operation & user’s manual
71
Web Interface Operation
|
Table 18 describes the attributes in the Email Configuration table.
Table 18. Email Configuration
Attribute
Description
Mail Server OPTIONAL. You can enter the IP Address or Host name of a SMTP mail server that
will be used to send Email messages from the Dell DPI.
NOTE: If entering a Host name, you are also required to enter the DNS Address.
DNS Address The IP address of your network. You must enter the DNS server address if you entered a
Host name for the Mail Server.
Optional SMTP Username OPTIONAL. The user name of the Simple Mail Transfer Protocol (SMTP) mail server
that will be used by the Dell DPI to log into the mail server to forward Email
notifications.
Optional SMTP Password OPTIONAL. The corresponding user password of the mail server.
Sender's Email Address Specifies the content of the “From” field of the Email. If you do not provide a sender's
Email address, the “From” field of the Email will be account@[ipv4_address] or
account@[ipv6_address].
SMTP Reply to Address The address to which the user will reply when the event mail is received.
SMTP Port Number The SMTP port number. You can enter a port number other than the standard port
setting for SMTP (port 25).
Identifying Email Notification Recipients
NOTE: Only the administrator can configure these settings.
To configure automatic Email notification:
1 From the System menu, click Email Notification. The Email Notification page displays.
2 Locate the Email Recipients Table.
3 Complete entries for attributes (see Table 19).
4 Click Save.
5 Optional. Click Send Test to send a test Email to the recipients according to the Mail Type setting (see
Figure 35 and Table 19).
NOTE:
If alarms and events have occurred, the event or alarm information is included in the test Email. However, if no
alarms or events have occurred, and the
Send Test button is clicked only once, the Email notification will contain no
information. The purpose of this test is to ensure the Email address is valid.
6 This procedure is completed.