Dell 1133 Mono Laser Install Manual
Download Operation & user’s manual of Dell 1133 Mono Laser Printer for Free or View it Online on All-Guides.com.
Brand: Dell
Category: Printer
Type: Operation & user’s manual for Dell 1133 Mono Laser
Pages: 88 (2.97 Mb)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
If the entire page is light, the print resolution setting is too low or the
toner save mode is on. Adjust the print resolution and turn the toner save
mode off. See the help screen of the printer driver.
A combination of faded or smeared defects may indicate that the toner
cartridge needs cleaning (See
Cleaning the inside).
The surface of the LSU part inside the machine may be dirty (See Cleaning
the inside).
Toner specks
The paper may not meet specifications; for example, the paper may be too
moist or rough (See
Print media specifications ).
The transfer roller may be dirty. Clean the inside of your machine. Contact
a service representative.
The paper path may need cleaning. Contact a service representative.
Dropouts If faded areas, generally rounded, occur randomly on the page:
A single sheet of paper may be defective. Try reprinting the job.
The moisture content of the paper is uneven or the paper has moist spots
on its surface. Try a different brand of paper (See
Print media
specifications ).
The paper lot is bad. The manufacturing processes can cause some areas
to reject toner. Try a different kind or brand of paper.
Change the printer option and try again. Go to Printing Preferences,
click Paper tab, and set type to Thick (See
Opening printing
preferences).
If these steps do not correct the problem, contact a service representative.
White Spots
If white spots appear on the page:
The paper is too rough and a lot of dirt from a paper falls to the inner
devices within the machine, so the transfer roller may be dirty. Clean the
inside of your machine (See
Cleaning the inside).
The paper path may need cleaning (See Cleaning the inside).
Vertical lines If black vertical streaks appear on the page:
The surface (drum part) of the toner cartridge inside the machine has
probably been scratched. Remove the toner cartridge and install a new
one (See
Replacing the toner cartridge).
If white vertical streaks appear on the page:
The surface of the LSU part inside the machine may be dirty (See Cleaning
the inside).
Black background If the amount of background shading becomes unacceptable:
Change to a lighter weight paper (See Print media specifications ).
Check the environmental conditions: very dry conditions or a high level of
humidity (higher than 80% RH) can increase the amount of background
shading.
Remove the old toner cartridge and, install a new one (See Replacing the
toner cartridge).
Toner smear If toner smears on the page:
Clean the inside of the machine (See Cleaning the inside).
Check the paper type and quality (See Print media specifications ).
Remove the toner cartridge and then, install a new one (See Replacing the
toner cartridge).
Vertical repetitive defects If marks repeatedly appear on the printed side of the page at even intervals: