Dell 3010CN Service Manual
Download Service manual of Dell 3010cn - Color Laser Printer Printer for Free or View it Online on All-Guides.com.
Brand: Dell
Category: Printer
Type: Service manual for Dell 3010cn - Color Laser Printer
Pages: 638 (28.93 Mb)
3 - 122
Chapter 3 Removal and Replacement Procedures (RRPs)
RRP4.1 MULTIPURPOSE FEEDER ASSEMBLY (PL 4.1.1)
[Removal]
1) Remove OPTION PAPER FEEDER ASSY for OPTION PAPER FEEDER specification. (RRP
3.1)
2) Remove COVER ASSY RH. (RRP 1.12)
3) Remove LEFT COVER. (RRP 1.10)
4) Remove MULTIPURPOSE FEEDER COVER. (RRP 1.7)
5) Remove LOWER FRONT COVER and COVER FRONT-U. (RRP 1.8)
6) Remove VERTICAL TRANSPORT ASSEMBLY. (RRP 5.3)
7) Remove connector (P/J408) and connector (P/J409) on MACHINE CONTROL UNIT(MCU)(PL
12.2.4)
8) Release two clamps on CHASSIS A (PL 12.2.1) and remove the harness of HARNESS-ASSY P/
H 1 (PL 4.1.23).
9) Remove six screws (silver, with a flange, tap, 8mm) that fix MULTIPURPOSE FEEDER
ASSEMBLY (PL 4.1.1) to the main unit.
When carrying out the work shown below, take care not to allow the cable tie which
bundles the harness of HARNESS-ASSY P/H 1 to be caught in the hole or the like in the
main unit.
Be sure that harness of HARNESS-ASSY P/H 1 is not caught between the main unit and
MULTIPURPOSE FEEDER ASSEMBLY when carrying out the work shown below.
10) Pull MULTIPURPOSE FEEDER ASSEMBLY forward a little, lift up MULTIPURPOSE
FEEDER ASSEMBLY a little in such a manner as to avoid TIE PLATE at the bottom of the
main unit and pull it out forward slowly, and remove HARNESS-ASSY P/H 1 from the hole of
the main unit, remove MULTIPURPOSE FEEDER ASSEMBLY.