Dell 3010CN Service Manual
Download Service manual of Dell 3010cn - Color Laser Printer Printer for Free or View it Online on All-Guides.com.
Brand: Dell
Category: Printer
Type: Service manual for Dell 3010cn - Color Laser Printer
Pages: 638 (28.93 Mb)
3 - 261
Chapter 3 Removal and Replacement Procedures (RRPs)
RRP10.2 FUSER LOCK SWITCH (PL 10.1.6)
[Removal]
1) Remove FUSER. (RRP 10.1)
2) Remove LEFT COVER. (RRP 1.10)
3) Remove FUSER CHUTE ASSEMBLY, BIAS TRANSFER ROLL(BTR) COVER. (RRP 6.1)
When carrying out the work shown below, leave the relay connector on the harness side.
4) Remove the connector (P/J128, blue) of FUSER LOCK SWITCH (PL 10.1.2).
5) Release the two clamps that fix the harness of FUSER LOCK SWITCH and remove the
harness of FUSER LOCK SWITCH, and insert the connector of FUSER LOCK SWITCH
inside the main unit through the hole of the main unit.
When carrying out the work shown below, be careful for falling down FUSER LOCK
SWITCH.
6) Remove a screw (silver, with a flange, tap, 6mm) that fix FUSER LOCK SWITCH to the main
unit.
7) Move FUSER LOCK SWITCH to the right side, release the hook of FUSER LOCK SWITCH
from the hole of the main unit and remove FUSER LOCK SWITCH.
[Replacement]
When carrying out the work shown below, be careful for falling down FUSER LOCK
SWITCH.
1) Match the hook and convex of FUSER LOCK SWITCH (PL 10.1.6) to the hole of the main unit,
move FUSER LOCK SWITCH to the left side and attach it.
2) Attach a hand to the under part of FUSER LOCK SWITCH and attach FUSER LOCK
SWITCH to the main unit using a screw (silver, with a flange, tap, 6mm).
3) Pull out the connector of FUSER LOCK SWITCH from the hole of the main unit.
4) Connect the connector (P/J128, blue) of FUSER LOCK SWITCH and fix the harness of FUSER
LOCK SWITCH using two clamps.
5) Attach FUSER CHUTE ASSEMBLY, BIAS TRANSFER ROLL(BTR) COVER. (RRP 6.1)
6) Attach LEFT COVER. (RRP 1.10)
7) Attach FUSER. (RRP 10.1)