Dell Catalyst 3130 Command Reference Manual
Download Command reference manual of Dell 3130 Color Laser Printer, Switch for Free or View it Online on All-Guides.com.
Brand: Dell
Type: Command reference manual
Model: Dell 3130 Color Laser , Dell Catalyst 3032
Pages: 1082 (21.4 Mb)
2-484
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-03
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
show dot1x
show dot1x
Use the show dot1x user EXEC command to display IEEE 802.1x statistics, administrative status, and
operational status for the switch or for the specified port.
show dot1x [{all [summary] | interface interface-id} [details | statistics]] [ | {begin | exclude |
include} expression]
Syntax Description
Command Modes User EXEC
Command History
Usage Guidelines If you do not specify a port, global parameters and a summary appear. If you specify a port, details for
that port appear.
If the port control is configured as unidirectional or bidirectional control and this setting conflicts with
the switch configuration, the show dot1x {all | interface interface-id} privileged EXEC command
output has this information:
ControlDirection = In (Inactive)
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output appear.
Examples This is an example of output from the show dot1x user EXEC command:
Switch> show dot1x
Sysauthcontrol Enabled
Dot1x Protocol Version 2
Critical Recovery Delay 100
Critical EAPOL Disabled
all [summary] (Optional) Display the IEEE 802.1x status for all ports.
interface interface-id (Optional) Display the IEEE 802.1x status for the specified port (including
type, stack member, module, and port number).
details (Optional) Display the IEEE 802.1x interface details.
statistics (Optional) Display IEEE 802.1x statistics for the specified port.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(40)EX1 This command was introduced.