Dell 3130cn - Color Laser Printer Troubleshooting Manual
Download Operation & user’s manual of Dell 3130cn - Color Laser Printer Label Maker, Printer for Free or View it Online on All-Guides.com.
Brand: Dell
Category: Label Maker , Printer , Switch
Type: Operation & user’s manual
Model: Dell 3130cn - Color Laser Printer , Dell 3130 Color Laser
Pages: 308 (3.84 Mb)
Download Dell 3130cn - Color Laser Printer Operation & user’s manual
1. Press Menu button.
2. Press
button until Admin Menu appears, and then press (Set) button.
3. Press
button until Panel Settings appears, and then press (Set) button.
4. Panel Lock is displayed. Press
(Set) button.
5. Press
button until Enable appears, and then press (Set) button.
6. Press Cancel button to return to the previous menu.
7. Press
button until Change Password appears, and then press (Set) button.
8. Reenter the password to confirm the password that you entered, and then press
(Set) button.
The password has been changed.
NOTE: If you forget your password, turn off the printer. Then, while holding Menu button turn on the printer.
Continue to hold Menu button until the display indicates Init Password. This will recover the factory default panel
password.
Note that the password for Panel Lock is disabled.
NOTE: If Panel Lock is Enable, the factory-default panel password is 0000.
Panel Lock
Disable* Does not lock Admin Menu with a password.
Enable Locks Admin Menu with a password.
Change Password
0000*
Sets or changes the password required to access Admin Menu.
0000-9999
Troubleshooting Instructions
Resetting Defaults
After executing this function and rebooting the printer, all the menu parameters, except the parameters for the network,
are reset to their default values.
When Using the Operator Panel
1. Press Menu button.
2. Press
button until Admin Menu appears, and then press (Set) button.
3. Press
button until Maintenance appears, and then press (Set) button.
4. Press
until Reset Defaults appears, and then press (Set) button.
5. The Are you sure? message appears on the operator panel. Press
(Set) button.
6. Turn off the printer to apply the settings.
When Using the Tool Box