Dell PowerEdge C6220 II Hardware Owner's Manual
Download Hardware owner's manual of Dell PowerEdge C6220 II Computer Hardware, Server for Free or View it Online on All-Guides.com.
Brand: Dell
Category: Computer Hardware , Server
Type: Hardware owner's manual for Dell PowerEdge C6220 II
Pages: 345 (10.65 Mb)
Using the System Setup Program | 125
Token
Setup option
Description
0224
Embedded
Video Controller
The embedded video controller is enabled, and it is the
primary video device.
0225
Embedded
Video Controller
The embedded video controller is disabled.
022D Boot Mode Enables booting to Unified Extensible Firmware Interfac
e
(UEFI) capable operating systems.
022E Boot Mode
Enables booting to legacy mode, ensures compatibility
with operating systems that do not support UEFI.
0231
Active
Processor Cores
All four cores of the processor are enabled. This is
applicable for Quad-core processor only.
0232
Active
Processor Cores
Two cores of the processor are enabled. This is applicable
for Quad-core and Dual-core processors.
0233
Active
Processor Cores
Single core of the processor is enabled. This is applicable
for Quad-core and Dual-Core processors.
024B C States Sets to enable (default), the processor can operate in all
available Power C States.
024C C States Sets to disable, there are no C states available for the
processor.
024D Pause on Errors Enables the BIOS from prompting for F1/F2 on error.
BIOS pauses at F1/F2 prompt.
024E Pause on Errors Disables the BIOS from prompting for F1/F2 on error.
BIOS pauses at F1/F2 prompt
024F Quiet Boot Enables the display of the splash or summary screen,
rather than the detail of the POST flow.
0250 Quiet Boot
Disables the display of the splash or summary screen. The
user is able to see the detail of the POST messages.
0251 N/A The first NIC is used for PXE boot, followed by NIC2.