A&D AD-1672 Instruction Manual
Download Instruction manual of A&D AD-1672 Kitchen Appliances for Free or View it Online on All-Guides.com.
1
AD-1672 Tabletop Breeze Break Instruction Manual
1. Features
x The tabletop breeze break protects the balance from breezes, due to air conditioning and body motion, thereby
reducing balance weighing error.
x The transparent panel assembly consists of antistatic plastic material which protects the balance from static
electricity.
x Two guides, in the back panel, can be used to pass the RS-232C and AC adapter cables through.
x It is easy to move panels assembled to the tabletop breeze break.
2. Specifications
x Mass: 10kg
x Size: 680 (Width) x 600 (Depth) x 720 (Height) mm
x Materials: Transparent Panel: Antistatic vinyl chloride
Frame: Aluminum
Back panel
Left side panel
Right side panel
Front beam panel
Ceiling panel
x Parts:
3. Unpacking
Note:The front beam panel and the back panel are packed using two joints of hooks and the square holes.
Slide up and remove the front beam panel
from the back panel .
4. Assembling the Tabletop Breeze Break
Step 1. Place the back panel , with the condition of the label on the top and the square holes on the
front face, on the weighing table.
Step 2. Assemble the left side panel
and
the back panel
using two joints
of hooks and the square holes.
Step 5. Place the top panel
on.
Caution
x Do not use organic solvents to clean the tabletop breeze break as that may damage the transparency and
antistatic properties of the panels.
x Use a soft lint free cloth dampened with warm water and a mild detergent, when cleaning the tabletop breeze break.
x Do not modify the tabletop breeze break.
x Consider to keep connections of parts when moving the tabletop breeze break.
Step 4. Assemble the front beam panel in the same
way as steps 2 and 3.
Cable guide
3-23-14 Higashi-Ikebukuro, Toshima-ku, Tokyo 170-0013 JAPAN
Telephone: [81] (3) 5391-6132 Fax: [81] (3) 5391-6148
Label
Insert and slide the hook o
f
the left side panel
into
the square hole of the back
panel
.
A
djust the heigh
t
of both panels.
Label
Label
Setting example
A
ccessory ( Sold separately )
Vibration removal board
( AD-1670 )
Front beam panel
Cable guide
Right side panel
Ceiling panel
Back panel
Left side panel
Cable guide
25 (Width) x 10 (Height) mm
Back panel
Square hole
Square hole
Cable guide
Front beam panel
Hook
Hook
Ceiling panel
Left and Right side panel
Hook
Square hole
Fixing tape (10 pcs )
Note:Fix the eight corners of the
tabletop breeze break with the
fixing tape after assembling.
Label
Fixing tape
Step 3. Assemble the right side panel
in the same way as step 2.
Front beam panel
Back panel
Hook
Square hole
Label
Square hole
Square hole