Dell PowerEdge 180AS Software User's Manual
Download Operation & user’s manual of Dell 2161DS Server, Switch for Free or View it Online on All-Guides.com. This version of Dell 2161DS Manual compatible with such list of devices, as: 2161DS, PowerEdge 180AS, PowerEdge 2160AS, PowerEdge 2321DS, PowerEdge KVM 1081AD
Brand: Dell
Type: Operation & user’s manual
Model: Dell 2161DS , Dell PowerEdge 180AS , Dell PowerEdge 2160AS , Dell PowerEdge 2321DS , Dell PowerEdge KVM 1081AD , Dell PowerEdge KVM 1082DS
Pages: 106 (0.91 Mb)
Installation 13
2
Select option 1 to set the port numbers. Type the port numbers you wish
to use for the HTTP port and the HTTPS port.
3
If the values are correct for your network, type <Y> and press the
<Enter> key.
4
At the local user station, input the target device names.
Mouse Acceleration
If you are experiencing slow mouse response during a remote video session,
deactivate mouse acceleration in the operating system of the target device
and adjust mouse acceleration on each target device to Slow or None.
Web Interface Installation and Setup
Once you have installed a new appliance, you can use the web interface to
configure unit parameters and launch video sessions.
Supported Browsers
The web interface supports the following browsers:
•
Microsoft Internet Explorer
®
version 6.x SP1 or later
•
Firefox version 2.0 or later
Launching the On-board Web Interface
To launch the web interface:
1
Open a web browser and type the IP address of the appliance using the
local Web interface.
NOTE: If you changed the default HTTP/HTTPS ports in the serial console and are
using an IPv4 address, use IP address format: https://<ipaddress>:<port#>, where
“port#” is the number you specified in the serial console. If you are using an IPv6
address, use format: https://[<ipaddress>]:<port#>, where “port#” is the number you
specified in the serial console. If you are using an IPv6 address, you must enclose
the address in square brackets.
2
The log in window opens. Type your username and password and click
OK
.
3
The web interface opens and displays the
Connections
tab.