Dell PowerEdge 180AS Software User's Manual
Download Operation & user’s manual of Dell 2161DS Server, Switch for Free or View it Online on All-Guides.com. This version of Dell 2161DS Manual compatible with such list of devices, as: 2161DS, PowerEdge 180AS, PowerEdge 2160AS, PowerEdge 2321DS, PowerEdge KVM 1081AD
Brand: Dell
Type: Operation & user’s manual
Model: Dell 2161DS , Dell PowerEdge 180AS , Dell PowerEdge 2160AS , Dell PowerEdge 2321DS , Dell PowerEdge KVM 1081AD , Dell PowerEdge KVM 1082DS
Pages: 106 (0.91 Mb)
Basic Software Operation 33
menu. The RCS software will automatically replace these variables when
the application runs.
9
Enable/disable the
Launch in command window
check box. When
enabled, the user-specified VNC application will be launched from within
an OS command window.
10
Click
OK
.
RDP Properties
When you indicate a user-specified RDP application, you may include its
command-line arguments. A selection of macros is available for placement in
the command-line; this may be useful for automatic replacement of variables
such as IP address, port number, user name and password. For RDP
commands that do not provide their own GUI, such as those for computers
running Windows, Linux, and UNIX
®
operating systems, you may have the
RDP application launch from within an OS command window.
To change RDP properties:
1
Select a server in the unit list.
2
Select
View - Properties
from the Remote Console Switch Explorer menu.
- or -
Click the
Properties
task button.
- or -
Right-click on the unit. Select
Properties
from the pop-up menu. The
Properties
dialog box appears.
3
Click the
RDP
tab, as appropriate.
4
For servers only, in the IP Address field, enter an IP address in dot notation
or a 1-128 character domain name. Spaces are not allowed. Duplicate
addresses are allowed. You may use an IPv4 or an IPv6 address, or both an
IPv4 and IPv6 address, simultaneously.
5
In the Port field, enter a port number in the range 23-65535. If blank, port
23 is used.
6
Mark to enable or clear to disable the
Use Default
check box. When this
setting is enabled, the default global setting specified in
Options
will be
used and all other portions of the
Application to Launch
area are disabled.