Dell 2161DS User's Manual
Download Hardware user's manual of Dell 2161DS Server, Switch for Free or View it Online on All-Guides.com. This version of Dell 2161DS Manual compatible with such list of devices, as: 2161DS, PowerEdge 180AS, PowerEdge 2160AS, PowerEdge KVM 1081AD, PowerEdge KVM 1082DS
Brand: Dell
Type: Hardware user's manual
Model: Dell 2161DS , Dell PowerEdge 180AS , Dell PowerEdge 2160AS , Dell PowerEdge 2321DS , Dell PowerEdge KVM 1081AD , Dell PowerEdge KVM 1082DS
Pages: 86 (1.84 Mb)
Installation 15
2
Installation
The Dell™ 2161DS Console Switch requires that the Remote Console Switch Software be installed
prior to use. Remote Console Switch Software allows a user to view and control a server attached to
the 2161DS Console Switch system, configure and maintain the system, and prevent unauthorized
access to the 2161DS Console Switch via IP connection.
NOTE: The analog port does not require the Remote Console Switch Software for operation. The analog
port uses the On-Screen Configuration and Activity Reporting interface (OSCAR®). For more information,
see "Analog Port Operation".
The 2161DS Console Switch system uses Ethernet networking infrastructure and TCP/IP protocol
to transmit keyboard, video, and mouse information between operators and connected computers.
Although 10BaseT Ethernet may be used, Dell recommends a dedicated, switched 100BaseT
network.
CAUTION: Before performing any of the procedures listed in this section, read and follow the Safety
Precautions outlined in the Overview section of this guide.
Getting Started
Before installing your 2161DS Console Switch, refer to the list below to ensure you have all items
that shipped with the 2161DS Console Switch, as well as other items necessary for proper
installation.
Supplied with the 2161DS Console Switch:
• 2161DS Console Switch unit
• Local country power cord
• Rack mounting brackets
•Serial cable
• 2161DS Console Switch Hardware and OSCAR User's Guide on CD
• 2161DS Console Switch Remote Console Switch Software User's Guide on CD
• 2161DS Console Switch Installation Instructions
Additional items needed:
• One Server Interface Pod (SIP) or Avocent® AVRIQ module per attached server
• One CAT 5 patch cable per attached server (up to 10 meters)
Optional items: