Dell PowerEdge 180AS Manual

Download Cable routing manual of Dell 2161DS Server, Switch for Free or View it Online on All-Guides.com. This version of Dell 2161DS Manual compatible with such list of devices, as: 2161DS, PowerEdge 180AS, PowerEdge 2160AS, PowerEdge 2321DS, PowerEdge KVM 1082DS

Dell 2161DS Cable routing manual - Page 1
1
Dell 2161DS Cable routing manual - Page 2
2
Dell 2161DS Cable routing manual - Page 3
3
Dell 2161DS Cable routing manual - Page 4
4
Dell 2161DS Cable routing manual - Page 5
5
Dell 2161DS Cable routing manual - Page 6
6
Dell 2161DS Cable routing manual - Page 7
7
Dell 2161DS Cable routing manual - Page 8
8
Dell 2161DS Cable routing manual - Page 9
9
Dell 2161DS Cable routing manual - Page 10
10
Dell 2161DS Cable routing manual - Page 11
11
Dell 2161DS Cable routing manual - Page 12
12
Dell 2161DS Cable routing manual - Page 13
13
Mounting and Cable Routing Procedures for Dell™ Digital KVM’s (1082DS, 2162DS, 4322DS)
Page 8
Figure 5: Four Post Rack: Routing Power and Data Cables
3.2
Two Post Flush Mount Cabling
Follow the instructions contained in the
Rack Installation Guide
to install the KVM flush mount into the
two post rack. Once installed, use these instructions to install the cables. All illustrations in the
following sections were created using the Dell KVM 4322DS.
3.2.1
Connecting the Cables to the KVM
Connect all applicable cables to the rear of the system and verify that all connections are secure. See
Figure 7. Note that the back adjustable portion of the rail has been removed to allow access to the tie
down holes used to retain the cables. See Figure 6 (front and back view of the removable portion of
the rail).
Figure 6: Removable portion of rail