Dell 6350 Installation Manual
Download Rack installation of Dell 530F Server, Storage for Free or View it Online on All-Guides.com.
support.dell.com Rack Installation Guide 1-9
To determine where to install the slide assemblies in the rack, perform the following
steps:
1. Place the front of the template on the vertical rails at the front of the rack where
you want to install the computer.
The printing on the template identifies the side facing outwards as the template
front.
2. Position the bottom of the template where the computer’s lower edge will be
located.
3. Mark the rack’s front vertical rails with a felt-tip marker or place masking tape
where the system’s upper and lower edges will be located (see Figure 1-7). Make
a mark or place tape on the vertical rails next to the template’s V-shaped notches.
"#$%
4. At the front of the rack cabinet, position one of the slide assemblies so that its
mounting-bracket flange fits between the marks or tape you placed on the rack
(see Figure 1-8). The hooks on the mounting-bracket flange should align with the
marks you made from the V-shaped notches in the template.
rack template
4 U (7 inches) between
slide assemblies
(drawing is not to scale)