Dell 8450 Supplementary Manual
Download Information update of Dell 8450 Server for Free or View it Online on All-Guides.com.
1-6 Dell PowerEdge 8450 Systems — Installing 1-GB DIMMs
2. Slide the peripherals bay out of the system chassis.
3. Attach the EMI shield to the back of the peripherals bay above the backplane
board (see Figure 1-6).
a. Align the slot on the EMI shield with the brace on the top of the peripherals
bay, and insert the bottom of the EMI shield into the back of the peripherals
bay (see Figure 1-6).
b. Press down on the EMI shield to snap it into place.
!"#$%
!"
1. Slide the peripherals bay back into the system chassis.
2. Secure the peripherals bay to the system chassis with the four screws.
3. Align the left and right edges of the memory board with the guides in the system
and slide the memory board back into the system until the retention levers on the
board contact the chassis.
4. Lock the memory board into place by rotating the retention levers inward until the
levers are parallel with the outer edge of the memory board.
5. Replace the memory board cover and secure it with the four captive
thumbscrews.
peripherals bay
EMI shield
brace
053YTbk1.book Page 6 Thursday, June 29, 2000 3:24 PM