Home | About | Contact

Dell PowerConnect 2708 Update Manual

Download Datasheet of Dell 2724 - PowerConnect Switch Switch for Free or View it Online on All-Guides.com. This version of Dell 2724 - PowerConnect Switch Manual compatible with such list of devices, as: 2724 - PowerConnect Switch, PowerConnect 2708, PowerConnect 2716, PowerConnect 2748

Dell 2724 - PowerConnect Switch Datasheet - Page 1
1
Dell 2724 - PowerConnect Switch Datasheet - Page 2
2
Dell 2724 - PowerConnect Switch Datasheet - Page 3
3
Dell 2724 - PowerConnect Switch Datasheet - Page 4
4
Dell 2724 - PowerConnect Switch Datasheet - Page 5
5
Dell 2724 - PowerConnect Switch Datasheet - Page 6
6
Dell 2724 - PowerConnect Switch Datasheet - Page 7
7
Dell 2724 - PowerConnect Switch Datasheet - Page 8
8
Dell 2724 - PowerConnect Switch Datasheet - Page 9
9
Dell 2724 - PowerConnect Switch Datasheet - Page 10
10
Dell 2724 - PowerConnect Switch Datasheet - Page 11
11
Dell 2724 - PowerConnect Switch Datasheet - Page 12
12
Page 1
background image

www

.dell.com | support.dell.com

Enabling Web-Managed Mode for 
Dell

TM

PowerConnect

TM

 2708, 2716, and 2724

 

NOTE: 

The PowerConnect 27xx switches are shipped as unmanaged switches. If you want to take 

advantage of the management features of this switch, follow the procedures below.

 

NOTE: 

When changing between the unmanaged and Web-managed modes, the switch is reset 

to the factory default settings.

 

NOTE: 

For more information on the management capabilities of the switch, see the 

Dell PowerConnect 27xx Systems User's Guide.

 

NOTE: 

All PowerConnect 27xx series switches have the same default IP address. It is advisable 

to change the IP address of each switch that has been set up as a Web-managed switch.

Enabling Web-Managed Mode

After powering up your switch according to the instructions in the User’s Guide, press the 
Managed Mode button once. The switch changes to Web-managed mode and the Managed Mode 
LED will be illuminated green. 

 

NOTE: 

The Managed Mode button is a toggle button located on the front panel and is recessed 

to prevent accidental mode changes. 

 

NOTE: 

The Managed Mode LED is not illuminated when the switch is in unmanaged mode.

When changing to the Web-managed mode, the switch is configured with a default IP address 
(192.168.2.1) and a default user login (User Name: admin and no password). In this mode, you can 
configure the switch using a Web interface.

 

NOTE: 

To access the device through the Web interface, see "Initial Configuration" in 

Dell PowerConnect 27xx Systems User's Guide

Logging In And Changing Switch IP Address and Password

You can update the switch IP Address either:

Manually, or

By enabling DHCP Addressing

 

NOTE: 

To update the IP address, see "Viewing System IP Address" in Dell PowerConnect 27xx Systems 

User's Guide.

 

NOTE: 

For security reasons, we recommend that you follow the steps in the User’s Guide for changing 

the password.

March 2005